Products

BONDERITE® S-FN 333 is a blend of fluorocarbon lubricants in an organic resin binder and solvent system designed for applications beyond the scope of conventional fluorocarbon coatings. Its low coefficient of friction, hardness, adhesion, resiliency, and cure conditions allow application of BONDERITE® S-FN 333 in a multitude of places where pure sintered PTFE coatings are unsuitable. Coatings of BONDERITE® S-FN 333 wear longer than pure PTFE, offer superior chemical resistance, and can be repaired without removing the existing coating. BONDERITE® S-FN 333 combines the toughness of the support resin with the surface properties of pure PTFE.

BONDERITE® S-FN 329 ACHESON is a fast-drying, resin bonded, fluorocarbon dry film lubricant capable of coating wood, metal, rubber, plastic, and glass substrates. It is designed for low-friction, light load, repetitive stresses. Moving parts wear longer, work harder, and need less maintenance when coated with this product. BONDERITE® S-FN 329 ACHESON cures at room temperature, allowing application where conventional sintered PTFE coatings cannot be considered. The coefficient of friction (static) when the coating is properly applied ranges from 0.06 to 0.09. A coating thickness of 0.0002 to 0.0007 inches (0.0051 to 0.0178 millimeters) generally provides the optimum low friction properties. BONDERITE® S-FN 329 ACHESON is a liquid concentrate that can be diluted according to need. Although Emralon® products are not specifically designed as protective coatings, they do offer moderate resistance to chemicals.

Dynasylan® 1124 is a secondary aminofunctional methoxy- silane possessing two symmetric silicon atoms. Dynasylan® 1124 acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier and can be used, for the chemical modification of substances. Dynasylan® 1124 is a colorless to yellow liquid with an amine-like odor, which is, for example, soluble in alcohols, aliphatic or aromatic hydrocarbons.

Dynasylan® 1122 is a secondary aminofunctional ethoxysilane possessing two symmetric silicone atoms. Dynasylan® 1122 acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier and can be used for the chemical modification of substances. Dynasylan® 1122 is a colorless to yellow liquid with an amine- like odor which is, for example, soluble in alcohols, aliphatic or aromatic hydrocarbons.

BONDERITE® S-FN M 254N is one of a series of Henkel’s Acheson resin- bonded lubricant coatings designed to provide dry film lubrication in a variety of industrial, consumer and military applications. BONDERITE® S-FN M 254N is a synergistic combination of MoS2 and other lubricants dispersed in an epoxy resin solution. BONDERITE® S-FN M 254N can be applied by standard brush, dip-spin, or spray techniques. BONDERITE® S-FN M 254N provides lifetime lubrication and good corrosion resistance for components which are inaccessible after assembly, but nevertheless must continue to function reliably. BONDERITE® S-FN M 254N provides an effective performance, even as a very thin film (0.0003 inch or 8 microns), thus there is little interference with operating tolerances.

Dynasylan® DAMO is a diamino­functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers) and as a surface modifier. Dynasylan® DAMO is a colorless to slightly yellowish liquid with an amine­like odour which is soluble in alcohols and aliphatic as well as aromatic hydrocarbons.

Rilsan® 7413 BLUE MAC ES is applied by spray and is compatible with metal substrates and surfaces.