Products

AERODISP® WK 7330 is a aqueous dispersion of a fumed silica and a fumed mixed oxide with a high solids content and a positive zetapotential.

EVATANE® 28-05 is a random ethylene-vinyl acetate copolymer.

TEGO® DISPers 705 is a wetting and dispersing additive for solvent borne formulations. Stabilitzes inorganic pigments, fillers and bentonites. Can be used to produce very stable and easy to handle pastes of bentonites.

AIRASE® 4500 is an effective defoamer concentrate based on organic polymer technology. Good balance of effectiveness and compatibility.

CRAYVALLAC® PC is a micronised hydrogenated castor oil derivative surface enhancing additive for powder coatings based on PRIMID, hybrid and TGIC technologies. CRAYVALLAC® PC is easily incorporated using conventional pre-mixing techniques prior to extrusion. The use of CRAYVALLAC® PC leads to a substantial improvement in the appearance of the final cured powder coating. This improvement is due to CRAYVALLAC® PC enhancing the flow, levelling and degassing processes during cure. This is the result of CRAYVALLAC® PC greatly reducing the melt viscosity during this critical levelling stage in the cure cycle. This viscosity reduction also enhances the performance of other additives such as acrylic levelling agents and the degassing agent benzoin. CRAYVALLAC® PC works well in both clear and pigmented powder coating systems based on PRIMID, Hybrid and TGIC technologies.

Licocene® PP MA 1332 TP is a propylene-ethylene-maleic anhydride copolymer.

D.E.R.® 354LV liquid epoxy resin is a standard liquid epoxy resin based on the reaction products of Bisphenol F and epichlorohydrin.

Licocene® PP MA 1332 granules TP is a propylene-ethylene copolymer modified with maleic anhydride.

Dynasylan® OCTMO is a monomeric medium­ chain alkyl functional silane. Dynasylan® OCTMO is a clear colorless liquid and soluble in common non­polar organic solvents (e.g. petroleum ether, toluene). However its low volatility and viscosity make Dynasylan® OCTMO an easy ­to ­handle additive. During the hydrolysis reaction between water and Dynasylan® OCTMO a certain amount of methanol (VOC) is released.

D.E.H.® 546 curing agent is a low viscosity modified cycloaliphatic amine intended for ambient temperature curing of liquid epoxy resins.

Dynasylan® IBTEO is a clear colorless liquid and soluble in common non­polar organic solvents (e.g. petroleum ether, toluene). However its low volatility and viscosity make Dynasylan® IBTEO an easy­to­handle additive. During the hydrolysis reaction between water and Dynasylan® IBTEO a certain amount of ethanol (VOC) is released.

K-FLEX® 850S is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate. The composition of this blend of classic dibenzoates is optimized for waterborne latex applications.

K-FLEX® 975P is a blend of diethylene glycol dibenzoate, dipropylene glycol dibenzoate and propylene glycol dibenzoate. K-FLEX® 975P was created to offer a broad range of compatibility with polar polymers

CRAYVALLAC® OPTIMA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications recommended for its ease of activation and smooth viscosity recovery (good levelling). CRAYVALLAC® OPTIMA overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body without the need of increasing the temperature of activation. Its smooth viscosity recovery will help to achieve high film thickness without compromising a good levelling.