Products

Dynasylan® 1122 is a secondary aminofunctional ethoxysilane possessing two symmetric silicone atoms. Dynasylan® 1122 acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier and can be used for the chemical modification of substances. Dynasylan® 1122 is a colorless to yellow liquid with an amine- like odor which is, for example, soluble in alcohols, aliphatic or aromatic hydrocarbons.

Dynasylan® 9116 is a monomeric long-chain alkylfunctional silane. Dynasylan® 9116 is a clear colorless liquid and soluble in common non-polar organic solvents (e.g. petroleum ether,toluene). However its low volatility and viscosity make Dynasylan® 9116 an easy-to-handle additive. During the hydrolysis reaction between water and Dynasylan® 9116 a certain amount of methanol (VOC) is released.

D.E.R.® 721 is an aliphatic liquid epoxy resin based on a reaction product of epichlorohydrin and C12-C14 alcohol.

DLVE™ 52 is a low viscosity epoxy resin that facilitates high solids coating formulations with low volatile organic compound (VOC) emissions, while minimizing compromises in performance. DLVE™ 52 be cured using multiple types of curing agents.

Dynasylan® 1189 is a bifunctional silane possessing a reactive secondary amine and hydrolyzable methoxysilyl groups. The dual nature of its reactivity allows Dynasylan® 1189 to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics and elastomers) thus functioning as an adhesion promoter or as a surface modifier and can be used for the chemical modification of substances. Dynasylan® 1189 is a colorless to slight yellowish liquid with a light amine­like odor which is, for example, soluble in alcohols, and aliphatic or aromatic hydrocarbons.

AP 2508 has very a low viscosity aliphatic amine hardener used in combination with epoxy resins for coatings and adhesives.

Dynasylan® AMEO-T is a blend of primary and secondary aminofunctional silanes. The blend contains more than 90 wt% of 3­ aminopropyltriethoxysilane. Aminofunctional silanes posses a reactive amino group and a hydrolyzable ethoxysilyl group. The dual nature of this reactivity allows Dynasylan® AMEO­T to bind chemically to both inorganic materials (e.g. glass, metals and fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers) thus functioning as an adhesion promoter, a surface modifier and a reactive reagent. Dynasylan® AMEO­T is a yellowish liquid with an amine­like odor. It is soluble in alcohols as well as aliphatic or aromatic hydrocarbons.

Dynasylan® AMMO is a bifunctional organosilane possessing a reactive primary amine and hydrolyzable inorganic methoxysilyl groups. The dual nature of its reactivity allows Dynasylan® AMMO to bind chemically to both inorganic materials (e.g. glass, metals fillers) and organic polymers (e.g. thermosets, thermoplastics and elastomers), thus functioning as an adhesion promoter and a surface modifier. Dynasylan® AMMO is a clear, colorless liquid having an amine­like odor which is soluble in alcohols and aliphatic and aromatic hydrocarbons.

3M™ Ceramic Microspheres W-210 is a unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. 3M™ Ceramic Microspheres W-210 is typically used to reduce VOC levels; increase filler loadings; improve hardness; and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of 3M™ Ceramic Microspheres W-210, it is also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.

3M™ Ceramic Microspheres W-610 are unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. These products are typically used to reduce VOC levels; increase filler loadings; improve hardness; and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of these products, they are also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.

DLVE™ 18 Epoxy Resin is a low viscosity epoxy resin (free of any organic solvent) that facilitates high solids coating formulations with low volatile organic compound (VOC) emissions, while minimizing compromises in performance.

Dynasylan® MTMO is a bifunctional organosilane possessing a reactive organic mercapto and a hydrolyzable inorganic methoxysilyl group. The dual nature of its reactivity allows Dynasylan® MTMO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter, crosslinking agent, surface modifier or reactive reagent. Dynasylan® MTMO is a clear, colorless to light yellow liquid with a slightly mercaptan odor. It is soluble in alcohols, ketones and aliphatic or aromatic hydrocarbons.

Dynasylan® AMEO is a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. The dual nature of its reactivity allows Dynasylan® AMEO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers) thus functioning as an adhesion promoter, crosslinker, and/or surface modifier.

Dynasylan® 1124 is a secondary aminofunctional methoxy- silane possessing two symmetric silicon atoms. Dynasylan® 1124 acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier and can be used, for the chemical modification of substances. Dynasylan® 1124 is a colorless to yellow liquid with an amine-like odor, which is, for example, soluble in alcohols, aliphatic or aromatic hydrocarbons.

3M™ Ceramic Microspheres W-410 are unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. These products are typically used to reduce VOC levels; increase filler loadings; improve hardness; and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of these products, they are also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.