Products

TAMOL® 2011 is a high-performance, hydrophobic copolymer dispersant especially useful for semi-gloss and gloss paints. TAMOL® 2011 is well suited for today’s generation of formulations as it is made without solvents or APEO surfactants. TAMOL® 2011 is particularly well fitted for formulations that contain hydrophobically modified urethane rheology modifiers.

TAMOL® 1254 is a versatile, low-cost, low-foaming polyacid dispersant that offers outstanding performance in a wide range of latex paint formulations. It is recommended for low sheen flats through gloss acrylic, styrene-acrylic and vinyl acrylic formulations. In addition to good efficiency, this polyacid dispersant offers excellent stability and color acceptance even in formulations containing zinc oxide.

AP4406L is a modified aliphatic amine hardener used with liquid epoxy resin based systems at ambient as well as low temperature.

EBECRYL® 3418 is a modified bisphenol A epoxy diacrylate that exhibits excellent reactivity and reduced viscosity. Films of EBECRYL® 3418 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high flexibility, gloss, toughness, adhesion and superior chemical and scratch resistance.

ZETASPERSE® 3600 is an anionic wetting and dispersing additive for waterborne formulations. Wets and stabilizes all kindsof pigments.Shows a very low influence on the chemical resistance of the coating film.

D.E.R.® 6225 is a modified, low molecular weight, solid reaction product of epichlorohydrin and bisphenol A. D.E.R. 6225 Resin is a modified, low molecular weight, solid epoxy resin which has been developed mainly for use in powder coatings. It has been designed for applications where excellent flow out and high gloss are required such as automotive, appliance or general metal decorative coatings. D.E.R.® 6225 is also suitable for use in thin film applications.

TEGO® DISPers 755 W is a slightly anionic,polymeric high-performance wetting and dispersing additive for waterborne formulations.Suitable for all kindsof pigments. With organic pigments, the outstanding stabilization and viscosity reduction can be observed. Low influence on coating properties, therefore suitable for exterior applications in industrial and transportation coating.Solvent-free.

AP 5635 is a low viscosity, modified Cycloaliphatic amine adduct hardener for epoxy resin based lacquers and coatings.

TEGO® DISPers 705 is a wetting and dispersing additive for solvent borne formulations. Stabilitzes inorganic pigments, fillers and bentonites. Can be used to produce very stable and easy to handle pastes of bentonites.

TEGO® DISPers 685 is a high polymeric wetting and dispersing additive for radiation-curing and solventborne formulations.Stabilizes all kindsof pigments, especially organic pigments and carbon blacks. 100% active and liquid, therefore suitable for 100% solids and high solids formulations.

CRAYVALLAC® PC is a micronised hydrogenated castor oil derivative surface enhancing additive for powder coatings based on PRIMID, hybrid and TGIC technologies. CRAYVALLAC® PC is easily incorporated using conventional pre-mixing techniques prior to extrusion. The use of CRAYVALLAC® PC leads to a substantial improvement in the appearance of the final cured powder coating. This improvement is due to CRAYVALLAC® PC enhancing the flow, levelling and degassing processes during cure. This is the result of CRAYVALLAC® PC greatly reducing the melt viscosity during this critical levelling stage in the cure cycle. This viscosity reduction also enhances the performance of other additives such as acrylic levelling agents and the degassing agent benzoin. CRAYVALLAC® PC works well in both clear and pigmented powder coating systems based on PRIMID, Hybrid and TGIC technologies.

AP 1227 is a low viscosity, modified aliphatic amine adduct hardener for epoxy resins based lacquers coatings.

VANCRYL® 800 is a styrene/acrylic copolymer used in waterborne inks and coatings for graphic arts applications. VANCRYL® 800 provides pigment wetting along with the viscosity stability needed for aqueous gravure and flexographic inks. The transfer properties and hold-out characteristics of inks prepared with VANCRYL 800 are excellent. VANCRYL® 800 is also effective as a protective colloid in the production of styrene-acrylic copolymer emulsions.

TAMOL® 851 is a versatile polyacid dispersant that offers outstanding performance in a wide range of latex paint formulations. TAMOL® 851 is supplied at 30% solids in water and is free of both formaldehyde preservatives and ammonia. It is recommended for flat through semigloss acrylic, stirene/acrylic, and vinyl acrylic formulations. TAMOL® 851 is specifically designed to offer excellent stability in those formulations that contain zinc oxide.