Products

VERSAL RED 3RLT is a pigment used in offset and lithographic printing.

CEAMLACTA IC 91-735 is a specialty hydrocolloid system, standardised to constant gel strength in cold water and cold milk, in order to obtain an uniform performance.

HP9078-Medium Oil Alkyd is a medium oil alkyd resin based on a combination of linseed oil and soybean oil. The solvent is VMandP naphtha. The main application for this resin is in the preparation of traffic alkyd paint but it can also be used in any application that requires fast set up and good durability.

ACEMATT® 810 is an untreated, coarse particle sized precipitated silica. It is especially recommended for coil coatings, as well as general industrial coatings.

CEAMGEL 90-508 is used in food and nutrition applications.

PolyJet 502 is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

CRAYVALLAC® WN-1220 is a micronised non polar polyethylene wax and is particularly characterised by its hardness and toughness. CRAYVALLAC® WN-1220 provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties.

DERTOPHENE® 1510 is a high softening point terpene phenolic resin with high polarity. Thanks to its excellent compatibility with chloroprene and acrylics, this resin improves adhesion, peel strength by preserving outstanding cohesive balance.

ALPASTE® 7130N has a very narrow particle size distribution. The extra fine particles, which can cause a loss of color saturation, have been removed. Because of this process, it produces attractively bright and clear finishes.

DRY #1 Castor Oil is a Technical Grade pure castor oil having a very low moisture content at 0.02% maximum. Also known as ricinus oil, it is a triglyceride of fatty acids which occurs in the seed of the castor plant, Ricinus communis. The low moisture content makes this product ideal for lubricant or polyurethane applications where low moisture is required.

3M™ Glass Bubbles XLD3000 are high-strength additives for polymers made from a water-resistant and chemically stable soda-lime-borosilicate glass. These hollow glass bubbles can be compounded with a variety of polymers to reduce the overall thermal conductivity of the composite. These composites can be coated or incorporated into deep sea oil pipelines to improve the flow assurance properties of the system.

CYMEL® 250 Resin is a new type of mixalkylated methylated and n-butylated melamine formaldehyde resin with high imino functions. It is designed specifically for automotive coating system and does not require a strong acid catalyst for fast cure response. CYMEL® 250 Resin is similar reactivity to conventional n-butylated melamine resin. A formulation by using CYMEL® 250 Resin can achieve lower VOC, compared to a formulation by using conventional n-butylated melamine formaldehyde resin.

Rilsan® BMV BLACK T is polyamide 11 produced from a renewable source. Rilsan® BMV BLACK T is designed for injection molding.