Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Country of Origin
- Plastics & Elastomers Functions
- Product Code
- MITM13850
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Materials Features
- Key Features
- Cimbar Performance Minerals PolyJet 502 alumina trihydrate product is specially produced for wire/cable-elastomers, coatings, thermoset plastics and thermoplastics that require highly controlled particle size distribution and critical physical properties.
- Compounders using PolyJet 502 are able to achieve high loading levels with superior physical properties.
- The increased surface area allows molders to achieve high surface finish and impact properties, while particle distribution control allows maximum loadings levels.
- PolyJet 502 offers excellent flame retardancy and smoke suppression.
Applications & Uses
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
Properties
- Physical Form
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S002777
- Principal
Other
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Odorless
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Brightness 98.0 % % Hunter "L" - Chemical Properties
Value Units Test Method / Conditions Loss on Ignition 34.6 % % by Water - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 1825.0 d d - Physical Properties
Value Units Test Method / Conditions Bulk Density 35.0 lb/ft³ lb/ft³ Bulk Factor 0.0495 gal/lb gal/lb Free Moisture Content 0.8 % % Median Particle Size 2.2 µm µm Oil Absorption 36.0 ml/100g ml/100g Sieve Fractionation (Retained) 0.0 % % +100 mesh Sieve Fractionation (Retained) 0.0 % % +325 mesh Sieve Fractionation (Retained) 0.0 % % + 200 Mesh Specific Gravity 2.42 - - Material Composition
Value Units Test Method / Conditions Aluminum Content 64.9 % % Ferric Oxide Content 0.009 % % Silica Content 0.01 % % as silicon dioxide Soda Content max. 0.3 % % Soluble Soda Content max. 0.05 % % as sodium dioxide - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Decomposition Temperature (SDS) 392.0 °F °F Initial Boiling Point (SDS) 2980.0 °C °C at 1013kPa Melting Point (SDS) approx. 300.0 °C °C at 1013 kPa Relative Density (SDS) 2.4 - at 20°C pH (SDS) 8.4-10.2 - 5% water suspension