Products

RHOBARR™ 214 is a binder and resin used in paper and paperboard coating applications. It provides blocking resistance, excellent stability, fat and grease resistance, good barrier properties, heat sealability, low coefficient of friction, and resistance to mineral oil, oil, plasticizers, and water.

PARALOID™ B-44S 40% Resin is specified for PVDF coil coatings and can be blended with other PARALOIDTM resins to adjust the balance of properties required for a particular application, such as color/base coats for metal substrates. It is supplied as a 40% solution in toluene and is also available in a solid grade (PARALOIDTM B-44 Solid Grade Thermoplastic Acrylic Resin).

PARALOID™ A-21 30% Resin is a very hard methyl methacrylate type polymer with enhanced adhesion properties. It is provided as a 30% solution in a toluene/butanol system. The polymer is also available in a solid grade form. Lacquers formulated with PARALOID™ A-21 30% Resin possess excellent intercoat adhesion, hardness, and outdoor durability. PARALOID™ A-21 30% Resin will air-dry rapidly to give clear, colorless films that have excellent resistance to yellowing.

PARALOID™ A-21LV 30% Resin is a very hard methyl methacrylate polymer with enhanced adhesion properties. It is supplied as a 30% solution in a toluene/MEK/butanol solvent system. The polymer is also available in solid grade form. PARALOID™ A-21LV 30% Resin is similar to PARALOID™ A-21LV 30% Resin in characteristics and uses but because of its solvent system, PARALOID™ A-21LV 30% Resin possesses better compatibility with cellulosics, such as nitrocellulose and cellulose acetate butyrate. PARALOID™ A-21LV 30% Resin also will allow a higher solids content at spray viscosity.

MACROLEX® Violet 3R Gran is a dye used in plastics and elastomers for household goods and toys.

EBECRYL® 4513 is an aliphatic urethane acrylate supplied for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4513 exhibits elastic properties making it suitable for use flexible substrates. Coatings formulated with EBECRYL® 4513 also demonstrate high chemical and wear resistance and are highly resistant to yellowing.

CYMEL® 1123 Resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesion and film flexibility, especially after several cure cycles, makes CYMEL® 1123 Resin particularly well suited for can coating applications. While CYMEL® 1123 Resin is insoluble in water, it shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. The poor light resistance properties of benzoguanamine makes CYMEL® 1123 Resin unsuitable for exterior applications.

DzBh Baling® YH-1209 is a linear styrene/isoprene block copolymer.

PEBAX® 7233 SA 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. PEBAX® 7233 SA 01 is suitable for food contact applications.

PEBAX® MX 1205 SA 01 MED is a polyamide used in printing and packaging applications.

PEBAX® 5533 SA 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. PEBAX® 5533 SA 01 is specially designed to food uses.

Elevast™ D20 are specialty hydrocarbon fluids designed to enhance the performance and processability of a broad range of polymer systems and applications. Elevast efficiently lowers Tg of polyolefins with carefully designed liquid polymer, with minimal change in crystalline properties and without requiring exquisite morphology control.

CYMEL® 323 is a crosslinking agent that offers fast cure, humidity resistance, improved film hardness, and solvent resistance in CASE ingredients.

ZINC STEARATE XM ULTRAFINE HYDENSE is a medium to low bulk density, fine white powder.

Elevast™ C30 are specialty hydrocarbon fluids designed to enhance the performance and processability of a broad range of polymer systems and applications. Elevast efficiently lowers Tg of polyolefins with carefully designed liquid polymer, with minimal change in crystalline properties and without requiring exquisite morphology control.