Products

CIMTALC® 7 is produced from high purity ore, which provide low iron content, low surface area and excellent color in dry form as well as when incorporated with resins. CIMTALC® 7 is primarily used in performance polypropylene, where improved tensile strength, flexural modulus, heat distortion temperature, increased stiffness, reduced shrinkage, and lower compounding costs are required. CIMTALC® 7 is are platy, hydrophobic, non-abrasive and chemically inert.

Agimid® 141N120-S NAT is a plasticized, heat and light stabilized product with processing aid for extrusion. The Agimid® range holds 3 long-chain polymers including 2 bio-based materials which have a broad range of applications in key markets such as automotive & industrial vehicles, sports & leisure, electrical & electronics and industrial.

TERMUL® 1284 is a Polyoxyethylene fatty glyceride.

HP1152 Soya Oil Alkyd is a low viscosity soya alkyd. It is formulated for use in ink vehicles and coatings that require improved pigment wetting. HP1152 - Soya Oil Alkyd can be used to improve the flow and reduce the viscosity of varnishes and inks, while minimising the need for solvents or ink oils. It can also be used to fortify latex paint, and increase the non-volatile content of conventional alkyd paints to improve their VOC compliance.

TFZ-N01P is a aluminum nitride powder.

Acheson SB-1 is a blend of commonly available solvents designed for use with Electrodag® 440, Emralon® 329, Emralon 335, and others. Acheson SB-1 is used to facilitate good handling and applicator convenience with the above products when spray applied.

VPS SIVO 260 is a novel multifunctional siloxane adhesion promoter with aminofunctionalities that can be used for various applications. VPS SIVO 260 is mainly dedicated for use in adhesives and sealants to improve the adhesion of hybrid products (e.g. silylated polyurethanes, MS Polymers®) and RTV-silicones - especially to difficult to stick polycarbonate substrates. In addition, VPS SIVO 260 can lead to adequate adhesive cure and it imparts both additional flexibility and hydrophobicity.

EBECRYL® 8311 is an aliphatic urethane acrylate nanocomposite that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. EBECRYL® 8311 can be easily incorporated into at any stage of formulating. Films of EBECRYL 8311 exhibit good weatherability, outstanding hardness, chemical, and scratch and abrasion resistance coupled with very low haze development after abrasion. EBECRYL® 8311is designed to be used as the main oligomer in formulations requiring a high degree of hardness, scratch, abrasion resistance and low development after abrasion

EBECRYL® 4744 is an undiluted, unsaturated polyester acrylate designed for UV-curing and EB coatings.

Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient in sol-gel formulations.

SURFYNOL® 104 is a multi-functional surfactant that combines dynamic wetting and molecular defoaming in waterborne coatings and inks. SURFYNOL® 104 is available in liquid form in different solvent cuts.

NATRIUMSTEARAT SW VEG - US is a stabilizer used in plastics and elastomers for industrial applications.

SUKOREZ® SU-110 is a waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).