Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Binder
- Product Code
- MITM00331
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
- Formulations based on Ebecryl®4744 exhibit high reactivity and result in hard films.
- Coatings formulated with Ebecryl®4744 are characterized by very good chemical and mechanical resistance including scratch resistance.
- Other characteristics are high abrasion resistance and very good resistance to yellowing.
Applications & Uses
- Application Method
- Coating End Applications
- Compatible Substrates & Surfaces
- Cure Method
- Markets
- Applications
- Product Applications
- Ebecryl®4744 is a polyester acrylate with a very balanced property profile.
- It can be used as the sole binder or used in combination with other binders to set specific properties.
- Ebecryl®4744 is used in the formulation of radiation-curing coatings (UV and electron beam) for the coating of wood, furniture, paper, parquet and films via the roller, spray and curtain coating processes.
- Formulation Information
- Depending on the application, the coatings can be set to application viscosity using common reactive thinners (mono-, di-, tri-, or tetra-acrylic acid esters) or solvent (e.g. butyl acetate).
- Because of the low-viscosity supply from, coating formulations require less reactive thinner and thus the binder properties are retained over a broad range of viscosities.
Properties
- Physical Form
- Compatibility Data
- Because of the large number of possible combinations of thinners, solvents and others substances, compatibility and storage stability must be tested in each case.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- Storage in original sealed Allnex containers. Recommended storage temperature: -10 to + 35°C Protect from intense radiation (light, UV), heat and foreign material.
- Allnex guarantees that for a period of 24 months following the day of manufacturing date, the product will meet the specifications or values set forth in section “specifications or characteristic data” above, whatever is applicable, provided that the product is stored in full compliance with the storage conditions set forth In and referenced under section “storage” above and is otherwise handle appropriately.
- The lapse of the 24 months period does not necessarily mean that the product no longer meets specifications or the set values.
- However, prior to using said product, Allnex recommend to test such a product if it still meets the specifications or the set values.
- Allnex does not make any representation regarding the product after the lapse of the 24 months period and Allnex shall not be responsible or liable in any way for the product failing to meet specifications or the set values after the lapse of the 24 months period.
Other
- Color (SDS)
- Yellowish liquid (decomposes)
- Immiscible In (SDS)
- Water
- Item Number
- Other Hazards
- Polymerization may occur from excessive heat, contamination or exposure to direct sunlight .
- Temperature Control
- Yes
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Acid Number max. 3.0 mg KOH/g mg KOH/g Hydroxyl Content 2.4 % % - Optical Properties
Value Units Test Method / Conditions Color Scale max. 300.0 Hazen Hazen Hazen Color Scale - Physical Properties
Value Units Test Method / Conditions Density 1.15 g/cm³ g/cm³ At 20°C Flash Point min. 120.0 °C °C Storage Temperature max. 140.0 °F °F Viscosity 4500.0-6500.0 - at 23°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 1.15 g/cm³ g/cm³ at 20°C Flash Point (SDS) 127.0 °C °C DIN EN ISO 2719 at 101.3kPa Vapor Pressure (SDS) 5.0 - at 20°C Viscosity (SDS) 7135.0 - DIN 53019 at 20°C - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 24.0 -