Products

HIKOTACK® P-150 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are vehicle for ink. HIKOTACK® P-150 shows superior compatibility with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and increase the gloss.

ROYALE BLACK® P8242 exhibits good processability and offers a good balance between cost and performance for applications requiring medium to high opacity and weatherability. It can be used for thicker multilayer films, pipes and drip laterals.

Rilsan® BESN BLACK P123 TL is a polyamide 11 compound, produced from a renewable and sustainable source (castor oil). This impact-modified grade is designed for tube extrusion and has improved hydrolysis resistance. It is a market reference for producing automotive cooling and selective catalyst reduction (SCR) lines.

AP 1054 LV is a low viscosity and highly reactive Phenalkamine hardener for epoxy resins based lacquers and coatings. It has excellent rapid cure properties, even at low temperatures offers very good chemical resistance, and provides excellent adhesion on wet, unprepared surfaces and concrete.

DERTOPOLINE® CG 105 is a dimerised glycerol rosin ester, with low acidity and deodorized.

Montana Platinum is the perfect starting point to connect “eco” with industry. Hemp bast fiber from IND HEMP is decorticated, clean and ready for integration into textiles, non wovens, bio composites and more. Hemp is the strongest natural fiber and is a good sustainable rotation for our farmers.

Stabaxol® I is an active antihydrolysis agent for polyester polyurethanes produced by hot casting as well as for adhesives based on polyester polyurethane.

Naugalube® 750 is an antioxidant used in appliances and electronics, automotive fluids and lubricants, cold chain and insulation, marine fluids and lubricants, transmission fluids, and general fluids and lubricants. It is suitable for engine oils, gear oils, hydraulic fluids, and turbine and compressor oils.

Dynasylan® SIVO 203 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 203 is mainly dedicated for use in adhesives and; sealants to improve the adhesion of hybrid products (e.g. silylated polyurethanes, MS Polymers), RTV-silicones, two-part polyurethanes and two-part epoxies to inorganic surfaces and some difficult plastic surfaces. In addition, Dynasylan® SIVO 203 can lead to fast sealant curing and high-crosslinked products and it imparts both additional flexibility and hydrophobicity.

Europrene® SOL TH 2312 is a linear block copolymer obtained by selective hydrogenation of styrene - butadiene-styrene block copolymers. The polymer is based on styrene and ethylene/butylene, where bound styrene content is 30%wt. A non-staining, TNPP free antioxidant system is added during the production process.

D.E.H.® 582 cycloaliphatic amine hardener is used as a curing agent for epoxy resins resulting in a non-blushing product with good water spot resistance and excellent chemical resistance. It has low color and good light stability, offers good low-temperature cure and can also be used as an accelerator for other hardeners. It has excellent adhesion to wood, metal, fiber-glass and concrete and is suitable for construction and civil engineering applications.

CRAYVALLAC® WN-1265 PR is an amide wax.

Dynasylan® 6498 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and ethoxy groups. Dynasylan® 6498 is a colorless, nearly odorless low ­viscosity liquid. Dynasylan® 6498 is an excellent compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (e.g. EPDM, EVA, PE).

CARPOL® TEAP-265 is a triethanolamine-initiated polyether polyol. The resultant material has a nominal functionality of three and a typical hydroxyl number of 635. This polyol’s functionality and short-chained nature make it optimal for use in rigid foam. Primarily used as a rigid polyol modifier, CARPOL® TEAP-265 can be used to cut the high viscosity seen with most sucrose based rigid polyols while acting as a good crosslinker. In addition, this polyol contains amine which enhances the overall system reactivity.