Products

Licowax® R 21 FL is a branched alkane carboxylic acid/salt mixture.

Rilsan® BZM 30 BLK TL is a polyamide resin used in chemical manufacturing and plastics and elastomers applications.

Zinc Oxide Grade 101 is a brilliant white powder manufactured using the French (Indirect) Process. It offers a medium-high m²/g surface area ("SA"), high assay, and very low impurities. This grade is used where lower impurities are required, and where increased zinc oxide reactivity provides benefits, such as in stearates and other zinc chemical applications.

PEBAX® MV 3000 SP 01 (France) is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This hydrophilic grade when extruded into either a thin film or laminated on to a substrate offers excellent permeability to moisture vapor while remaining waterproof. PEBAX® MV 3000 SP 01 (France) is specifically designed for outdoor application that needs excellent weather resistance properties.

HFGEL 120-FY is a rheology modifier used in industrial additives.

CEAMGEL FP 91-988 is a carrageenan based product, standardised to constant gel strength, in order to obtain a uniform performance. Carrageenan is a natural hydrocolloid extracted from red seaweed of the Rhodophyceae class.

CEAMFIBRE 49260 is a dietary fibre ingredient produced from high quality citrus peel.

Focus TPP is a non-halogen flame retardant plasticizer for phenolic resin-based, copper clad laminate, cellulose resin, vinyl resin and rubber, and some engineering plastics such as PPO.

CYMEL® UI-38-I resin is a partially iso-butylated urea crosslinker supplied in iso-butanol and intended for use in industrial stoving applications and especially systems applied by electrostatic spray. Because of the poor weathering resistance of urea resins, CYMEL® UI-38-I is not recommended for exterior applications.

VERSAL YELLOW GR is a pigment used in plastics and elastomers.

CYMEL® 202 Resin is a methylated/n-butylated, high imino melamine crosslinker supplied in n-butanol. Its hydrophobic nature combined with high reactivity, high solids content, and rather low formaldehyde release during the curing process makes CYMEL® 202 Resin suitable for a wide range of medium to high solids or waterborne baking applications, like can and container coating formulations, automotive coatings, and low cure systems to improve film appearance and resistance properties. CYMEL® 202 resin has a high tendency to self-condense at rather low baking temperatures, providing films with very good hardness, gloss, chemical resistance, and outdoor durability.

RHOPLEX® EC-3814 is designed to provide elastomeric coatings with an excellent balance of elongation, tensile strength and dirt pickup resistance over a wide temperature range. RHOPLEX® EC-3814 retains this balance of properties over formulation ranges not previously attainable for elastomeric wall coatings. RHOPLEX® EC-3814 can also be formulated at a higher PVC than Dow’s other elastomeric binders, which can lead to formulated cost savings, while still maintaining excellent mechanical properties. Furthermore, it shows a dramatic improvement in alkali resistance over hot masonry substrates compared to other elastomeric binders.

EBECRYL® 524 is an acid-modified polyester resin diluted 30% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA). It exhibits very low color and moderate acid value. EBECRYL 524 is used as the primary or modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to increase adhesion to a variety of substrates including paper, plastics and metal. It is particularly useful in UV/EB laminating adhesives.

Inhibicor™ 1000 corrosion inhibitor pigment is an effective replacement for Cr6+ in Aerospace primer applications on Aluminum.

Licocene® PP 7502 fine grain is used in industrial additives for pigment concentrates and in plastics & elastomers for extruded items. It functions as a carrier, dispersant, and external lubricant.