Products

Protectosil® 100 is a clear, penetrating, breathable VOC compliant reactive penetrating sealer for use on concrete. Protectosil® 100 is an isobutylalkoxy functional silane allows for faster dry times and superior performance on high quality mix designs typical of new bridge decks. Creates a deep hydrophobic layer that prevents water and waterborne contaminants from entering the substrate and causing premature deterioration. By combining ultra-low surface tension with a tailored rate of reaction, Protectosil® 100 is able to move through the moisture boundary layer that lines the pore structure of the substrate. This permits the development of uniform gradient permeation, consistent level of protection throughout the entire depth of penetration, allowing for longer treatment life, especially on wearing surfaces.

Focus Ester PA 50 is a synthetic polymerized ester designed to boost performance and enhance finish in severe metalworking applications. Focus Ester PA 50 has a molecular weight that gives it a perfect structure to replace chlorinated paraffins. Focus Ester PA 50 is a complex fatty acid ester, which offers the highest level of hydrolytic stability properties. In addition to replacing chlorine, Focus Ester PA 50 can be used to replace or reduce treat levels of all other boundary and EP additives, like phosphorous, sulfur, lard oil, blown oil and other fatty friction modifiers.

Focus Base PS 12 is a cost effective, soluble oil emulsifier base package designed for use in both naphthenic and paraffinic oils. It can be used to formulate both soluble oils and semi-synthetic metalworking fluids. Focus Base PS 12 is formulated with a sodium sulfonate/succinic anhydride primary emulsion system and gives improved hard water stability and good rust protection with cleanliness. It assists in the prevention of soap and sludge build-up in sumps, reducing corrosion and microbiological problems. Focus Base PS12 does not contain chlorine, free sulfur, nitrites, phenols or heavy metals.

NUTRATIVA™ Organic Cranberry Protein Powder is a concentrated source of complete protein, antioxidants, anthocyanins, potassium, calcium, and both soluble and insoluble fiber. This reddish-pink powder is cold-pressed without the use of enzymes or extraction solvents from the organic seeds of the American cranberry (Vaccinium macrocarpon). Organic Cranberry Protein Powder offers consumer appeal through its color, taste, performance, and functional benefits.

CEAMGEL 90-312 is a carrageenan based product, standardised to constant gel strength, in order to obtain a uniform performance. Carrageenan is a natural hydrocolloid extracted from red seaweed of the Rhodophyceae class.

D.E.R.® 663U Solid Epoxy Resin is a low molecular weight solid reaction product of epichlorohydrin and bisphenol A. D.E.R.® 663U Solid Epoxy Resin is a low molecular weight, solid epoxy resin developed mainly for use in powder coatings. It can be incorporated in both pure epoxy and epoxy/polyester systems where the relationship between its melt viscosity and softening point properties ensures the production of homogeneous powders with good gloss, excellent flexibility and smoothness, and good storage stability. D.E.R.®. 663U Resin can also be used in epoxy ester applications, for example, in industrial or automotive coatings.

BONDERITE® S-FN 329 ACHESON is a fast-drying, resin bonded, fluorocarbon dry film lubricant capable of coating wood, metal, rubber, plastic, and glass substrates. It is designed for low-friction, light load, repetitive stresses. Moving parts wear longer, work harder, and need less maintenance when coated with this product. BONDERITE® S-FN 329 ACHESON cures at room temperature, allowing application where conventional sintered PTFE coatings cannot be considered. The coefficient of friction (static) when the coating is properly applied ranges from 0.06 to 0.09. A coating thickness of 0.0002 to 0.0007 inches (0.0051 to 0.0178 millimeters) generally provides the optimum low friction properties. BONDERITE® S-FN 329 ACHESON is a liquid concentrate that can be diluted according to need. Although Emralon® products are not specifically designed as protective coatings, they do offer moderate resistance to chemicals.

TETRAMERE D4, or octamethylcyclotetrasiloxane, is described in CAS No. 556-67-2.

KRYSTOL™ 550 is a white mineral oil lubricant used as an internal lubricant in plastics and elastomers. It is also used in adhesives, sealants, fluids, and lubricants markets.

Exolit® RP 614 presscake is a fine brown-red powder with a water content of 10-25%, based on a highly stabilized, microencapsulated grade of red phosphorus. This allows a safe and simple handling of the red phosphorus in a presscake form, and avoids the hazards associated when working with dry red phosphorus powders. Exolit RP 614 Presscake is noted for its high oxidation and thermal stability. It is insoluble in water and organic solvents. Due to the combination of stabilization and microencapsulation, the material is mostly inert against atmospheric influences.

PEBAX® 5533 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. PEBAX® 5533 SP 01 has been developed to be heat and UV resistant.

CEAMLACTA DC 2664 is a carrageenan based product, standardized to obtain a uniform performance. Carrageenan is a natural hydrocolloid extracted from red seaweed of the Rhodophyceae class SC.

AEROSIL® R 8200 is a structure modified with hexamethyldisilazane aftertreated fumed silica.

HYDREX® P is a coating agent used on paper substrates and in industrial additives.