Products

EBECRYL® 150 is an ethoxylated bisphenol A diacrylate commonly used as reactive diluent in UV/EB cure applications. EBECRYL® 150 can improve the cure response, hardness, and chemical resistance of UV/EB curable coatings and inks while maintaining good adhesion, and without imparting brittleness.

Corrosperse™ 177 M is a 70% dispersion of Strontium Chromate in Methyl Amyl Ketone. It has a Fineness of Grind (7 Hegman) which means no grinding is required and it can easily be incorporated using high speed mixing techniques. Because the product is a pourable liquid, there are none of the concerns associated with Hexavalent Chrome in pigment form, specifically exposure to dust.

CYREZ® 964 is a crosslinking agent and adhesion promoter from the chemical mixtures and blends family, used in plastics and elastomers.

CYMEL® 301 Resin is a highly methylated melamine crosslinker supplied at >98% solids. Relative to CYMEL® 303 LF resin, CYMEL® 301 Resin is slightly higher in both monomer content and extent of alkylation resulting in a product with lower viscosity that exhibits fast cure response and imparts excellent flexibility to the film. Its high functionality and low tendency to self-condense makes CYMEL® 301 Resin suitable for a wide range of applications like can, container, automotive and general industrial coatings.

Crestapol® 1210 is a tough low viscosity resin with a rapid cure, which can be highly filled. It is designed for use in closed mould processes (please see Close Mould Guide). It is not recommended for open mould applications.

G-2234-2 Grease is a member of a family of technologically advanced greases which have been developed by complexing modified overbased calcium sulfonates. This technology, developed and patented by Chemtura, is characterized by exceptional mechanical stability, high dropping point, high load carrying performance, reduced wear, and excellent resistance to water and corrosion. This technology equals and in many ways outperforms other premium, high temperature greases such as Lithium Complex, Aluminum Complex and Polyurea.

PKT SORB-IT® 3G G2-809 27X52 2K/PP is an absorbent used in industrial additives applications.

CARPOL® GP-5015 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 5000 Da. This triol is polymerized with propylene oxide and then capped with 15% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., however, CARPOL® GP-5015 may also be included as a component in other urethane products and applications.

Licocene® PE MA 4351 fine grain is a highly grafted maleic anhydride polyethylene wax with advantageous physical properties e. g. for powder coating applications. The maleic anhydride modified polyethylene creates structured surfaces in combination with titanium dioxide. The roughness depends on the ratio of titanium dioxide to Licocene® PE MA 4351 fine grain. Licocene® PE MA 4351 fine grain is used as an efficient coupling agent for glass-, wood-, natural fibre and inorganic filled PE compounds.

AEROSIL® R 202 Coating is a fumed silica after-treated with polydimethylsiloxane.

CIMBAR BF BLANC FIX is used as a filler and pigment in architectural coatings, automotive OEM coatings, industrial coatings, and paints and coatings. It is also applied in frictionizing processes.

Baeropan® MC 90249 KA/4 is a lead-free stabilizer/lubricant one-pack Ca/Zn for cable extrusion. This one-pack with balanced lubrication effect is recommended for 105 °C insulation. This product was designed for UL rated insulation such as THWN-2 requiring long term wet electrical properties as per UL83.