Products

Europrene® SOL T 9326 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and isoprene, where bound styrene content is 30 % wt and diblock content is 15 %. A non-staining, TNPP free antioxidant system is added during the production process.

H.B. Fuller® PD-0128 is a binder and resin with excellent scrub resistance, used in waterborne adhesives for adhesives, sealants, and architectural coatings.

CEAMGUM 3020 is a locust bean gum based product, consisting on a high molecular weight polysaccharide, which is obtained from the ground endosperm of the locust bean SC (Ceratonia Silica).

EBECRYL® 820 is a low viscosity polyester acrylate oligomer, with exceptional pigment wetting properties. This combined with the low viscosity of this material makes it ideal as a pigment grinding resin. EBECRYL® 820 also gives a fast cure response when formulated with other oligomers and cured via ultraviolet light (UV) or electron beam (EB). EBECRYL® 820 is used for the preparation of pigment pastes with high pigment loading. This can be produced using a triple roll mill or bead mill. EBECRYL® 820 can be used for grinding all process colors and spot colors. EBECRYL® 820 has been specifically developed to formulate UV/EB curable inks for sensitive applications such as food packaging.

EBECRYL® 244 is an aliphatic urethane diacrylate diluted 10% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA) (1). EBECRYL® 244 exhibits light color and good cure response. Films of EBECRYL® 244 cured by ultraviolet light (UV) or an electron beam (EB) demonstrate good flexibility, toughness, abrasion and water resistance, and are resistant to yellowing.

Desi Pak® 1 UNIT DP SAP4593 1300/DR 71 is a desiccant product.

BONDERITE® S-FN M 254N is one of a series of Henkel’s Acheson resin- bonded lubricant coatings designed to provide dry film lubrication in a variety of industrial, consumer and military applications. BONDERITE® S-FN M 254N is a synergistic combination of MoS2 and other lubricants dispersed in an epoxy resin solution. BONDERITE® S-FN M 254N can be applied by standard brush, dip-spin, or spray techniques. BONDERITE® S-FN M 254N provides lifetime lubrication and good corrosion resistance for components which are inaccessible after assembly, but nevertheless must continue to function reliably. BONDERITE® S-FN M 254N provides an effective performance, even as a very thin film (0.0003 inch or 8 microns), thus there is little interference with operating tolerances.

B 4001 is a liquid Bio-plasticizer for PVC.

XIBOND® 260 is a reactive additive to improve the blend morphology of polymer blends. This additive is a random copolymer of styrene and maleic anhydride.

Ceridust® 3716 is a micronized, polar modified polyethylene wax.

Agimid® 243 N120-S is a plasticized, heat and light stabilized and impact modified product for extrusion. The main application is colored pneumatic tubes for industrial and automotive markets. The Agimid® range holds 3 long-chain polymers including 2 bio-based materials which have a broad range of applications in key markets such as automotive, industrial vehicles, sports, leisure, electrical, electronics and industrial.

KRONOS® 2225 is used for plastic films used outdoors.

CEAMFIBRE 7040 is a dietary fibre ingredient produced from high quality citrus peel.