Products

AIRASE® 8070 is an effective deaerator concentrate based on polyether siloxane technology. Very effective against micro-foam. Offers good compatibility.

CYMEL® 243-3 Resin is a partially n-butylated melamine-formaldehyde crosslinking agent supplied in high flash aromatic solvent. It has excellent compatibility and is recommended for thermosetting acrylic and alkyd topcoat finishes and metal decorating systems. Its high resistivity provides wide latitude in formulating electrostatic spray finishes.

DzBh Baling® SBS YH-791E is a linear styrene/butadiene.

KYNAR® 740 is a resin made of polyvinylidene fluoride (PVDF) used in industrial plastics and elastomers applications.

Agimid® 2153 BOO is a polyamide 12 reinforced with 30% of glass fibers dedicated to injection molding. The main applications are car keys and fittings for the automotive and industrial markets.

ZINCUM SW is a high bulk density, free-flowing granular.

Bayferrox® 663/4 is an inorganic pigment based on iron compounds. It is a single ingredient product used for various pigmentation applications.

GENIOPLAST® PELLET 345 is a soft, highly transparent, thermoplastic elastomeric silicone copolymer.

TOYOCAT®-ET belongs to the tertiary amines chemical family and is used in industrial and industrial coatings markets.

TEGO® Hammer 300000 is a hammer-finish agent used in solventborne and waterborne coatings.

UCECOAT® 7655 is a radiation curable polyurethane dispersion which is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, both transparent and pigmented, but can also be used for other applications and substrates, such as field applied UV curable coatings for wood, concrete, VCT (vinyl composition tile), and resilient floors. This polyurethane dispersion is very reactive and exhibits very good scratch resistance. Due to the low viscosity, it can be applied by spray or curtain coater.

ALUMINIUM ALLOY POWDER SCALMA40B5 is an odourless light grey material which is available in a range of sizes up to 1mm. Above this, the product is usually referred to as granulate. It is produced commercially by atomizing molten aluminium using air or inert gas. Our products are available in a range of sizes, the first grade commercially available has a median size of 1 micron. And all aluminiuim powder is made from minimum 99.85% purity aluminium ingot.

RHOPLEX® WL-100 is an acrylic-styrene copolymer designed for high-gloss, high-DOI (Distinctness of Image) waterborne plastic coatings where an attractive appearance and excellent dry and wet adhesion are important considerations. The favorable colloidal stability (robustness) of RHOPLEX® WL-100 accommodates a broad range of formulation types and formulation process techniques, providing the formulator with a versatile binder for a variety of applications. Robustness, along with 50% weight solids, allows the formulator to achieve volume solids above conventional waterborne binders.

AP 1562 LT is a low viscosity, reactive, Phenalkamine epoxy hardener solution for epoxy resins based lacquers and coatings.