Enhanced TDS
Identification & Functionality
- Blend
- No
- Carrier
- Chemical Family
- Country of Origin
- Product Code
- MITM00586
- Product Functions
- Single Ingredient
- No
- Technologies
- Product Families
Features & Benefits
- Product Features
- Product Performance
UCECOAT® 7655 is characterized by:
- Translucent to white appearance
- Low viscosity
- Tack-free after water evaporation and before UV curing
- Low VOC
UV/EB cured formulations based on UCECOAT® 7655 are characterized by the following performance properties:
- Very high reactivity in clear and pigmented systems
- Very good hardness and high scratch resistance
- Excellent chemical and stain resistance
- Optimized colloidal stability
- Good compatibility and easy to formulate.
The actual properties of UV cured products also depend on the selection of the other formulation components, such as additives and photoinitiators.
Applications & Uses
- Markets
- Applications
- Product Applications
Formulated UV curable products containing UCECOAT® 7655 are typically applied by spray, curtain coating and roll-to-roll coating methods, as well as by roller and T-bar in field applied applications.
UCECOAT® 7655 is recommended for use in:
- Pigmented coatings for furniture applications
- Clear topcoat for wood furniture applications
- Coating on melamine paper foils
- Field applied clear coatings on wood, concrete, VCT, and resilient flooring
Regulatory & Compliance
- Compliance (Regulatory)
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
Protect the product from freezing. Care should be taken not to expose the product to high temperature conditions or direct sunlight. Containers should be kept closed and away from materials that react with water. Bacteriological contamination can occur if the product is stored for an extended period in a container which is not sufficiently sealed or clean. Storage and handling should be in stainless steel, amber glass, or amber polyethylene containers. After prolonged storage product can settle and may require agitation to re-disperse. This product is stable under normal conditions of handling and storage. Do not store this material under an oxygen free atmosphere. Wash thoroughly after handling. Use with adequate ventilation.
Other
- Appearance
- White
- Appearance (SDS)
- Dispersion
- Color (SDS)
- White
- Cure Method
- Item Number
- Labeling Claims
- Material Compatibility
- Miscible in (SDS)
- Water, all proportions
- Odor (SDS)
- Practically odorless
- Oxidizing Properties (SDS)
- None
- Physical Form
- Processing & Application Methods
- Product End Uses
- Protect from Freezing
- Yes
- Temperature Control
- Yes
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions pH 7.0-8.5 - - Material Composition
Value Units Test Method / Conditions Non-Volatile Content 33.5-36.5 % - Physical Properties
Value Units Test Method / Conditions Density 1.05 g/cm³ at 25°C Particle Size max. 150.0 nm Storage Temperature 39.2-104.0 °F Viscosity max. 200.0 mPa.s at 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 100.0 °C Water Specific Gravity (SDS) 1.05 - Vapor Pressure (SDS) 2.3 kPa at 20°C Volatile Content (SDS) 63.5-66.5 %(W/W) Water pH (SDS) 7.0-8.5 - - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 365.0 d