Products

EBECRYL®1291 is a hexafunctional aliphatic urethane acrylate oligomer which provides extremely fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL®1291 exhibit high hardness, abrasion and solvent resistance.

NYONOL™ LP-250 is a water insoluble polyalkene glycol (PAG). It is a clear liquid at room temperature with a low vapor pressure. NYONOL™ LP-250 exhibits excellent lubricity and can be used in various industrial lubricating applications.

DERCOLYTE® TS 105, produced by copolymerization of terpene and styrene, is a very light-colored tackifying resin showing excellent adhesive performances. It is particularly recommended in hot melt pressure-sensitive adhesives formulations.

ACS781608 BURNT UMBER is low in viscosity, high in color strength, and maintain excellent stability. Possible applications for the ACS line include but are not limited to aerosols, industrial coatings, architectural coatings, graphic films, floor coatings, wood finishes, concrete finishes, and adhesives.

3M™ Ceramic Microspheres W-610 are unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. These products are typically used to reduce VOC levels, increase filler loadings, improve hardness and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of these products, they are also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.

VANCRYL® 950 emulsion is a very low Tg acrylic polymer designed for film printing applications in the graphic arts industry. Inks made from this polymer exhibit excellent gloss, adhesion to polyolefins, ice water crinkle resistance, and fine printing characteristics. VANCRYL® 950 also has the unusual combined properties of excellent resolubility and fast drying. These properties are needed when converting flexible packaging printing from solvent-based to water-based formulations. VANCRYL® 950 emulsion is compatible with VANCRYL® 68 pigment dispersions as well as other commonly used pigment dispersions. It also exhibits excellent compatibility with additives such as surfactants, adhesion promoters, alcohols, and waxes. VANCRYL® 950 can be used as the backbone of printing inks and overprint coatings where various COF or slide angle requirements are needed, from a range of 0.25 to 0.48.

EBECRYL® 8701 is an aliphatic urethane triacrylate designed to bridge the gap between high surface hardness and excellent outdoor durability. EBECRYL® 8701 can be used in applications requiring a combination of hardness, increased Tg, chemical resistance, and outdoor durability. Films ofEBECRYL® 8701 cured by ultraviolet light (UV) or electron beam (EB) exhibit a unique combination of surface hardness and outdoor durability typically not found in one molecule. Over time, EBECRYL® 8701 may crystallize to a waxy solid form.

EBECRYL® 53 is a purified grade of OTA 480, especially developed for formulating ultraviolet light (UV) and electron beam (EB) curable printing inks and overprint varnishes for food packaging applications. The purification process removes impurities that are potential sources for odor and extractables in cured products.

Bleumina® 200 is a specialty carbon black grade designed to exhibit high colour and jetness for multi- purpose pigment application in various plastics, ink and coatings with good UV resistance. Morphological properties of Bleumina® 200 are balanced in such a way that it provides a good combination of dispersibility and colour strength, and it offers very good UV protection and smooth surface finish.

VANCRYL® 800 is a styrene/acrylic copolymer used in waterborne inks and coatings for graphic arts applications. VANCRYL® 800 provides pigment wetting along with the viscosity stability needed for aqueous gravure and flexographic inks. The transfer properties and hold-out characteristics of inks prepared with VANCRYL 800 are excellent. VANCRYL® 800 is also effective as a protective colloid in the production of styrene-acrylic copolymer emulsions.

SURFYNOL® 104 E is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks.

TERMIX® 5225 is a solution containing a blend of anionic and nonionic surfactants. It is a clear amber, low viscosity liquid, free of suspended material.

BONDERITE® L-FG ADAG C is an aqueous-based colloidal dispersion. It contains ultra-fine graphite particles along with a unique stabilizer and binder system. These properties produce excellent lubricity and release, faster wetting, and higher dilution ratios. It remains stable at service temperatures of 600°F and intermittent temperatures as high as 2200°F.

D.E.R.® 3911A epoxy resin is a hybrid based on a bisphenol a based liquid epoxy resin and a urethane based resin.

NPG(PO)2DA is useful as a reactive diluent in formulating ultraviolet light (UV) and electron beam (EB) curable coatings and inks. NPG(PO)2DA provides efficient viscosity reduction of viscous resins, good flow and wetting, and greater flexibility than other common difunctional acrylate diluents.