DERCOLYTE® TS 105

DERCOLYTE® TS 105, produced by copolymerization of terpene and styrene, is a very light-colored tackifying resin showing excellent adhesive performances. It is particularly recommended in hot melt pressure-sensitive adhesives formulations.

Principal: DRT FRANCE

Functions: Binder & Resin, Tackifier, Tackifier

Chemical Family: Polyterpenes

Compatible Polymers & Resins: Rosin, Styrene Butadiene Styrene (SBS), Styrene Isoprene Styrene (SIS), Vinyl Acetate Copolymer

End Uses: Hot Melt Pressure Sensitive Adhesive, Labels, Tape, Tires

Features: Good Tackifying

View All Documents

Enhanced TDS

Identification & Functionality

Blend
No
CASE Ingredients Functions
Chemical Family
Plastics & Elastomers Functions
Product Code
MITM16515
Single Ingredient
Yes
Technologies
Product Families

Features & Benefits

CASE Ingredients Features

Applications & Uses

Properties

Regulatory & Compliance

Principal Information

Group Principal Number
S002297
Principal

Storage & Handling

Storage Information
  • Under cover and at temperature below 30°C.
  • About 18 months - storage conditions and inventory control must be observed.

Other

ADR/RID/ADN Proper Shipping Name
Not Available
ADR/RID/ADN UN Number
Not Available
Color (SDS)
Yellowish
Explosive Nature (SDS)
Non explosive
IATA/ICAO Proper Shipping Name
Not Available
IATA/ICAO UN Number
Not Available
IMO/IMDG Proper Shipping Name
Not Available
IMO/IMDG UN Number
Not Available
Insoluble in (SDS)
Water
Item Number
Odor (SDS)
Odorless
Other Hazards
Resin dust may ignite on contact with electrostatic discharge or exposure to flame or other sources of ignition
Oxidizing Properties (SDS)
Non-oxidising
USA/DOT Proper Shipping Name
Not Available
USA/DOT UN Number
Not Available
Optical Properties
ValueUnitsTest Method / Conditions
Color Scale1.0Gardner
Shelf Life & Stability
ValueUnitsTest Method / Conditions
Shelf Life18.0mo
Physical Properties
ValueUnitsTest Method / Conditions
Glass Transition Temperature (Tg)55.0°C
Molecular Weight1200.0g/mol
Softening Point105.0°CRing and Ball Test
Storage Temperature41.0-86.0°F
Viscosity3000.0mPa.sAt 150°C
Material Composition
ValueUnitsTest Method / Conditions
Renewable Content66.0%ASTM D6866-21b
SDS Physical and Chemical Properties
ValueUnitsTest Method / Conditions
Flash Point (SDS)min. 210.0°CClosed Cup
Relative Density (SDS)1.0-at 20°C
Softening Point (SDS)105.0°C