Products

MARLOX® RT 42 is one of the many low-foaming EO/PO non-ionic surfactants produced by Sasol Chemicals in Germany. These alcohol alkoxylates are based on Sasol’s wide range of linear and semi-linear fatty alcohols. They are produced by alkoxylation of the fatty alcohols to varying degrees using ethylene oxide and propylene oxide. MARLOX RT 42 is a clear to slightly turbid liquid at room temperature and essentially 100% active.

KRONOS® 2360 is suitable for the highest demands on the weather resistance of coatings and plastics.

SIPERNAT® represents a specific product range of precipitated silica, aluminium and calcium silicates. SIPERNAT® D 17 is a hydrophobic (i. e. not wettable by water) silica also used in defoamer.

3M™ Glass Bubbles HGS19K46 provide a low-density solution ideal for drilling and cementing across highly depleted zones and weaker formations. They help prevent issues such as fluid loss, lost circulation, differential sticking, and formation damage by minimizing excessive overbalance conditions. This results in improved penetration rates and enhanced well productivity in challenging environments.

Dynasylan® F 8263 acts as a surface modifier on oxidic, carboxy- and hydroxyfunctional substrates (e.g. glass, ceramic). Dynasylan® F 8263 is a colorless liquid. It can be diluted in alcohols and various other organic solvents, e.g. n-hexane, xylol, acetone or ethyl acetate.

Europrene® SOL T 172 is a radial block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 31 % wt. The polymer is extended with paraffinic oil (45 phr). A non-staining, TNPP free antioxidant system is added during the production process.

SUKOREZ® SU-500 is a hydrogenated water white C5/Cyclic hydrocarbon resin with softening point around 100°C. it can be used in hot melt PSAs and hot melt adhesives with good compatibility with SIS, EVA, polyolefins and etc. Especially, it can be used for applications where require good thermal stability in terms of color.

CIMTALC® 7 is produced from high purity ore, which provide low iron content, low surface area and excellent color in dry form as well as when incorporated with resins. CIMTALC® 7 is primarily used in performance polypropylene, where improved tensile strength, flexural modulus, heat distortion temperature, increased stiffness, reduced shrinkage, and lower compounding costs are required. CIMTALC® 7 is are platy, hydrophobic, non-abrasive and chemically inert.

Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient in sol-gel formulations.