Products

PARALOID™ B-67MT Resin is an alkyd-compatible acrylic resin designed to have good compatibility with long-oil alkyds. The addition of PARALOID™ B-67MT Resin to alkyds, oils, or varnishes produces coatings of improved hardness, faster drying speed, better color and gloss retention, and improved hold out and brushing characteristics.

ZINC STEARATE XM POWDER CODE 5925 has medium bulk density, fine white powder.

MAINCOTE™ EC-11 is an acrylic polymer recommended for use in elastomeric coatings for industrial maintenance applications on both metal and cementitious substrates. When formulated as an anti-corrosive coating, MAINCOTE™ EC-11 Acrylic Emulsion can be applied to both clean and marginally-prepared rusty steel, and imparts excellent corrosion resistance, adhesion, low temperature flexibility and dirt pickup resistance. When applied to concrete surfaces, MAINCOTE™ EC-11 Acrylic Emulsion provides excellent resistance to blistering and the stresses imparted by thermal cycling. It is especially useful in applications where prevention of spalling and scaling of the concrete surface, caused by exposure to water and deicing chemicals, is required. The proper formulation and elastomeric nature of MAINCOTE™ EC-11 Acrylic Emulsion facilitates the production of coatings with excellent flexibility, very low VOC levels (< 50 g/L), and the ability to be applied in thick films (e.g., 10-20 mils dry) without sagging or mudcracking.

EBECRYL® 109 is an acrylate - methacrylate monomer blend, containing 50% of trimethylolpropane triacrylate (TMPTA) and 50% hydroxyethyl methacrylate (HEMA). It polymerizes when exposed to sources of free radicals. EBECRYL® 109 is particularly useful in coatings where a good thermal and/or chemical resistance are important.

AP 5694 is modified aliphatic amine hardener for epoxy resins based coatings.

Bermocoll® MT 500 is a strongly modified non-ionic, water soluble cellulose ether, intended as a water retaining and consistency improving additive to cement based mortars. Bermocoll® MT 500 contains methyl, ethyl and hydroxyethyl substituents giving unique balance between workability and strength.

Naugalube® 750 is an antioxidant used in appliances and electronics, automotive fluids and lubricants, cold chain and insulation, marine fluids and lubricants, transmission fluids, and general fluids and lubricants. It is suitable for engine oils, gear oils, hydraulic fluids, and turbine and compressor oils.

Europrene® SOL TH 2312 is a linear block copolymer obtained by selective hydrogenation of styrene - butadiene-styrene block copolymers. The polymer is based on styrene and ethylene/butylene, where bound styrene content is 30%wt. A non-staining, TNPP free antioxidant system is added during the production process.

D.E.H.® 582 cycloaliphatic amine hardener is used as a curing agent for epoxy resins resulting in a non-blushing product with good water spot resistance and excellent chemical resistance. It has low color and good light stability, offers good low-temperature cure and can also be used as an accelerator for other hardeners. It has excellent adhesion to wood, metal, fiber-glass and concrete and is suitable for construction and civil engineering applications.

CRAYVALLAC® WN-1265 PR is an amide wax.

CARPOL® TEAP-265 is a triethanolamine-initiated polyether polyol. The resultant material has a nominal functionality of three and a typical hydroxyl number of 635. This polyol’s functionality and short-chained nature make it optimal for use in rigid foam. Primarily used as a rigid polyol modifier, CARPOL® TEAP-265 can be used to cut the high viscosity seen with most sucrose based rigid polyols while acting as a good crosslinker. In addition, this polyol contains amine which enhances the overall system reactivity.

MITM14923 Synia PI 6976 is a cationic photoinitiator containing a mixture of triarylsulfonium hexafluoroantimonate salts in propylene carbonate. MITM14923 Synia PI 6976 photoinitiator is used to UV cure CYRACURE cycloaliphatic epoxide resins, vinyl ethers and other cationically curing materials.

D.E.R.® 916 Epoxy Resin is a modified, semi-solid, epoxy novolac resin emulsified in water.