Products

ACEMATT® TS 100 is an untreated thermal silica with outstanding properties. It provides very high efficiency and transparency. It can be used in a large variety of coatings.

AIRASE® 5700 is a very compatible defoamer concentrate based on polyether siloxane technology. Contains fumed silica.

TEGO® Wet 236 is a siloxane-based superwetter providing exceptional substrate wetting and good flow and leveling in waterbornecoatings and inks.

ACEMATT® OK 630 is a wax-treated, medium particle-sized precipitated silica. By offering very high compatibility, it can be used in a large variety of coatings.

TEGO® Rad 2300 is an efficient non-foaming, radically cross-linkable substrate wetting and slip additive. Recommended even for high shear applications and the wetting of low energy substrates including fresh litho inks.

TEGO® AIREX 991 shows very strong defoaming against both macro- and micro foam in solvent borne and high solids coatings. Especially for spray-applied coatings.

EBECRYL® 3700-20T is the bisphenol A epoxy diacrylate, EBECRYL 3700, diluted 20% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1), to provide a lower viscosity, easier handling product. EBECRYL 3700- 20T exhibits very fast cure response and low odor. Films of EBECRYL® 3700-20T cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, scratch resistance, and excellent chemical resistance.

EBECRYL® 3700 is the diacrylate ester of a bisphenol A epoxy resin, and exhibits low odor and exceptional cure response. Films of EBECRYL® 3700 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high surface hardness, high gloss, and excellent chemical resistance. EBECRYL® 3700 finds broad use in UV/EB applications, such as coatings, overprint varnishes, inks, adhesives, and electronics.

RHOPLEX® WL-81, waterborne, acrylic polymer is specifically designed for the formulation of clear and pigmented ambient or forced-air-dry industrial lacquers. Coating systems based on this polymer are suitable for use on a variety of substrates and offer a number of key benefits currently provided by solvent borne industrial lacquers, but without the flammability, odor, or other problems inherent with such systems.

TEGO® Foamex 18 is a compatible defoamer concentrate based on organic polymer technology. Free of silicone, solvent, and mineral oil.

EBECRYL® 3721 is a modified bisphenol A epoxy diacrylate resin. EBECRYL® 3721 demonstrates increased toughness in ultraviolet light (UV) or electron beam (EB) energy cured coatings compared to standard epoxy acrylates while maintaining high reactivity and superior chemical resistance.

TEGO® AIREX 991 shows very strong defoaming against both macro- and micro foam in solvent borne and high solids coatings. Especially for spray- applied coatings. TEGO® AIREX 990 is a highly compatible dearator concentrate that shows very high effectiveness in solvent borne and high solids coatings. Very suitable for clear coats.

D.E.R.® 6510-HT has been developed for high-performance, fusion bonded epoxy coatings withstanding high operating temperatures. This resin also offers excellent chemical and corrosion resistance coupled with the outstanding heat performance. D.E.R.® 6510-HT solid epoxy resin is a 2-functional epoxy resin which has been chemically modified to allow fusion bonded powder coating formulations to withstand operating temperatures up to 160 °C. D.E.R.® 6510-HT solid epoxy resin enables fusion bonded binder systems to achieve an optimized balance of properties using commonly available, commercial crosslinkers and normal processing conditions. D.E.R.® 6510-HTsolid epoxy resin can be used in combination with standard and modified bisphenol A and novolac epoxy resins. This will help formulators to develop a powder coating system with the right balance of thermal and mechanical properties while still providing good corrosion resistance and chemical resistance.

TEGO® ViscoPlus 3010 is a pH independent, associative thickener with newtonian flow behavior. It is especially designed for high-shear thickening.