Products

TEGO® Rad 2300 is an efficient non-foaming, radically cross-linkable substrate wetting and slip additive. Recommended even for high shear applications and the wetting of low energy substrates including fresh litho inks.

TEGO® Foamex 825 is a compatible defoamer emulsion based on polyether siloxane technology. Good balance of effectiveness and compatibility.

CYMEL® UI-20-E Resin is a partially iso-butylated urea crosslinker designed for use in acid curing wood coatings with high film build requirements. Being supplied in ethanol, films dry very quickly resulting in coatings with excellent early block resistance.

ROSHIELD™ 3188 is a self-crosslinking acrylic copolymer designed for use in factory-applied, waterborne, interior wood coatings. It offers good early sandability, block resistance, and stain resistance, as well as extremely low microfoam entrapment. ROSHIELD™ 3188 is recommended for sanding sealers and clear topcoats, and offers excellent clarity and appearance over both dark and light woods. Its self-crosslinking chemistry is responsible for its rapid cure and excellent stain resistance.

CYMEL® UI-19-I resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties provide good block resistance and makes CYMEL® UI19-I resin suitable for ambient and low bake industrial wood finishes.

AEROSIL® E 972 is a fumed silica after-treated with DDS (dimethyldichlorosilane). It is a veryefficient rheology modifier, suitable for a broad rangeof applications. It is veryeasytodisperse.

TEGO® Glide 100 is highly compatible and suitable for a multitude of applications. It provides outstanding flow and leveling properties and medium slip.

UCECOAT® 6569 is a water dilutable aliphatic urethane acrylate oligomer containing approx. 5% water. UCECOAT® 6569 can be used to formulate UV/EB curable waterborne wood coatings as well as screen printing inks and varnishes. Cured films containing UCECOAT® 6569 demonstrate good adhesion to a variety of wood types, along with good flexibility, resistance to yellowing, and resistance to water and solvents. UCECOAT® 6569 based coatings can be re-coated after curing.

CYMEL® MB-98 resin is a butylated melamine crosslinker with high degree of alkylation and very low free formaldehyde. It has been specially designed to improve the resistance properties of urea-based acid curing wood coating formulations.

TEGO® DISPers 755 W is a slightly anionic,polymeric high-performance wetting and dispersing additive for waterborne formulations.Suitable for all kindsof pigments. With organic pigments, the outstanding stabilization and viscosity reduction can be observed. Low influence on coating properties, therefore suitable for exterior applications in industrial and transportation coating.Solvent-free.

TEGO® Glide 410 shows oustanding slip and excellent anti-crater properties. It is highly effective and can be used in a broad rangeof different coatings and inks.

TEGO® Wet 290 shows excellent wetting and anti-crater properties with flow promotion in water borne coatings.

DYNOL™ 360 is an organic-based superwetter providing great substrate wetting especially on difficult-to-wet substrates. DYNOL™ 360 also acts as a coalescing aid and is suitable for waterborne coatings and inks.

SURFYNOL® 104 Z is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks.

AEROSIL® 380 is a hydrophilicfumed silica with a specificsurfacearea of 380 m²/g.