Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Product Code
- MITM00582
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Performance
UCECOAT® 6569 is characterized by:
- High viscosity
- Light color
UV/EB cured products based on UCECOAT® 6569 are characterized by the following performance properties:
- Good adhesion and transparency on wood
- Flexibility
- Good reactivity
- Resistance to yellowing
The actual properties of UV/EB cured products also depend on the selection of other formulation components such as reactive diluents, additives, and photoinitiators.
Applications & Uses
- Application Method
- Coating End Applications
- Compatible Substrates & Surfaces
- Cure Method
- Ink & Toner End Applications
- Markets
- Applications
- Product Applications
Formulated UV/EB curable products containing UCECOAT® 6569 may be applied via direct or reverse roll coating and screen printing methods. UCECOAT® 6569 is recommended for:
- Adhesion primers for wood.
- Waterborne screen inks and coatings.
Properties
- Physical Form
- Soluble In
Technical Details & Test Data
- Viscosity Reduction
- UCECOAT® 6569 can be diluted with up to 50% by weight water for viscosity reduction. If total water content exceeds 50%, the product stability may be decreased. Viscosity reduction can also be achieved with reactive diluents such as tripropylene glycol diacrylate (TPGDA)(1). The product stability should be assessed when using a particular combination of reactive diluent and water.
Safety & Health
- Safety Information
Avoid contact with eyes, skin and clothing. Direct contact with this material may cause mild eye and skin irritation. Contact with skin may cause a cross-allergic reaction in persons already sensitized to acrylate materials. Wash thoroughly after handling. Use with adequate ventilation. Keep container closed.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- The maximum recommended storage temperature range for UCECOAT 6569 is 4°C to 40°C (39°F to 104°F). Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container.
Other
- Appearance
- Clear liquid
- Appearance (SDS)
- Dispersion
- Color (SDS)
- Clear to milky white
- Item Number
- Odor (SDS)
- Amine - like
- Other Hazards
- Polymerization may occur from excessive heat, contamination or exposure to direct sunlight .Contact with skin may cause a cross-allergic reaction in persons already sensitized to acrylates
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 2.0 Gardner Gardner - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 d d - Physical Properties
Value Units Test Method / Conditions Density 1.1 g/mL g/mL At 25°C Viscosity 6000.0-10000.0 cPs cPs At 60°C - Material Composition
Value Units Test Method / Conditions Solid Content 95.0 %(W/W) %(W/W) - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C °C Flash Point (SDS) 131.0 °C °C SetaFlash Closed Cup Flash Point (SDS) 131.0 °C °C Specific Gravity (SDS) min. 1.0 - Vapor Pressure (SDS) max. 0.133 hPa hPa At 20°C Volatile Content (SDS) 0.0-4.0 %(W/W) %(W/W)