Products

CYMEL® UI-20-E Resin is a partially iso-butylated urea crosslinker designed for use in acid curing wood coatings with high film build requirements. Being supplied in ethanol, films dry very quickly resulting in coatings with excellent early block resistance.

Basic Zinc Chromate 233 is primarily used in two component acid wash primers used to protect steel, galvanized surfaces and aluminum where provides improved adhesion to the topcoat as well. Since it provides protection on various substrates as well. Typical use levels 3-7

Wayncor™ 211 is an anti-corrosion inhibitive pigment that is very effective in solvent and water based epoxy primers. It does not affect the pot life of 2K systems. It can also be used alone or as a synergist with Zinc Phosphate. Typical use level is between 3 - 7 % total formula weight.

CYMEL® 3020 resin is a highly alkylated, mixed ether (methyl/n-butyl) melamine crosslinker. Its hydrophobic nature combined with very good film appearance properties makes CYMEL® 3020 resin suitable for automotive topcoat applications. CYMEL® 3020 is insoluble in water but has excellent compatibility with water soluble backbone polymers and provides very good stability in pHbuffered alkaline waterborne formulations.

Wayncor™ 222 is a white, non-refractive, anti-corrosive pigment used in protective coatings. It is widely considered by the coatings industry to be a standard corrosion inhibitor. It exhibits a high degree of versatility and is compatible with almost all commercially available aqueous and solvent based coatings. The use level will vary depending upon resin system, pigment volume concentration and desired performance parameters, however typical use levels are between 3 - 10% total formula weight.

CYMEL® 5010 Resin is a partially n-butylated benzoguanamine resin supplied in a mixture of n-butanol and xylene and designed for solvent-based coatings. Like other benzoguanamine resins, CYMEL® 5010 Resin imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation. Because of the limited light resistance properties of benzoguanamine, CYMEL® 5010 Resin is not suitable for exterior applications.

CYMEL® XW 3106 Resin is a specially alkylated, high solids melamine crosslinking agent designed for solvent-borne, two-pack ambient and low bake formulations. The low-temperature cure potential for this crosslinker provides the opportunity to formulate high-performance coatings for heat-sensitive substrates. These systems have excellent early hardness, resistance properties, appearance, and hot/cold cycle flexibility.

CYMEL® U-227-8 Resin is a general-purpose n-butylated urea resin that combines fast curing speed with excellent enamel stability in pigmented systems. It is compatible with low and medium molecular weight epoxy resins and is recommended for use in epoxy/urea metal primers, metal decorating, and drum and dipping enamels. CYMEL® U-227-8 Resin is also recommended as a pigment grinding vehicle. It is supplied in a mixture of n-butanol and xylene.

CYMEL® 370 Resin is a partially methylated melamine crosslinker supplied in iso butanol. Like other high imino resins, CYMEL® 370 Resin is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resistance and exterior durability. The high reactivity, combined with high solids content makes CYMEL® 370 Resin suitable for a wide range of solventborne and waterborne industrial bake formulations.

CYMEL® 350 Resin is a highly methylated, monomeric melamine resin recommended for use in both waterborne and solvent-borne systems. It has very good water solubility properties, which makes it easy to incorporate with excellent stability in emulsion systems, as it remains in the water phase and does not migrate to the polymer phase. Like CYMEL® 350 Resin, it is a very efficient crosslinking agent and is recommended for coil coatings and high solids systems. CYMEL® 350 Resin has a slightly slower cure response than other monomeric methylated melamine resins. This provides excellent flow and levelling characteristics and less solvent popping on cure

CRAYVALLAC® LA-377 is a modified urea dissolved in DMSO. CRAYVALLAC® LA-377 is a pourable liquid rheology modifier for post addition to water-based coatings such as water-dilutable alkyds and acrylic emulsions. It was developed to ensure particular suitability for metal coating as its formula is lithium chloride-free. CRAYVALLAC® LA-377 should be added to the coating as a slow stream under low to medium shear conditions to ensure sufficient dispersion. Although efficient stirring is required to ensure homogeneity, elevated temperatures are not required for activation and the use of excessive shear should be avoided.

CYMEL® MI-97-IX Resin is a partially iso-butylated melamine crosslinker supplied in a mixture of iso-butanol and xylene. Its fast drying behavior provides films with good early block resistance for stacking of parts and makes CYMEL® MI-97-IX Resin suitable for fast low temperature curing systems, like wood and paper coatings, providing very good film hardness, adhesion and appearance.

CYMEL® U-93-210 Resin is an n-butylated urea formaldehyde resin supplied in a mixture of n-butanol and xylene. It has excellent compatibility with epoxy resins and is recommended in primer formulations which are to be topcoated and rebaked.

CRAYVALLAC® LA-350 is used in acrylics and alkyds for waterborne coatings. It features high shear thinning, high thixotropy, improved anti-sagging properties, recoatability, sag resistance, and viscosity control. The product functions as a rheology modifier in CASE ingredients.

CYMEL® UI-38-I resin is a partially iso-butylated urea crosslinker supplied in iso-butanol and intended for use in industrial stoving applications and especially systems applied by electrostatic spray. Because of the poor weathering resistance of urea resins, CYMEL® UI-38-I is not recommended for exterior applications.