EBECRYL® LED 02

EBECRYL® LED 02, a mercapto modified polyester acrylate resin, can be added as a co-resin to UV curable formulations. EBECRYL LED 02 transforms formulations into UV LED, UVA, or low energy curable systems by providing better surface cure. In addition, this co-resin can also be used to obtain better surface cure in high energy cure formulations. EBECRYL LED 02 provides better surface cure by mitigating oxygen inhibition of the free radical process.

Principal: allnex Radcure

Chemical Family: Polyester Acrylates, Polyesters

Features: Good Surface Care

Safety Data SheetTechnical Data Sheet
  • TypeDocument Name
View All Documents

Enhanced TDS

Identification & Functionality

Blend
No
CASE Ingredients Functions
Binder & Resin
Chemical Family
Polyester Acrylates,
Polyesters
Function
Binder
Product Code
MITM10435
Single Ingredient
Yes
Technologies
CASE
Product Families
CASE — Resins & Binders
Acrylics,
Polyesters

Features & Benefits

CASE Ingredients Features
Good Surface Care

Applications & Uses

Compatible Polymers & Resins
Acrylates,
Epoxies (EP),
Polyesters,
Polyurethanes (PU)
Cure Method
Radiation Cure
Markets
Automotive & Transportation
Applications
Automotive & Transportation — Coatings & Finishes
Automotive OEM Coatings
Product Applications
  • EBECRYL® LED 02 has been developed for UV LED applications, but is equally suitable for UVA and other low energy curing applications.
  • It can also provide better surface cure in typical, high energy curing applications that use standard medium pressure mercury lamps.

Properties

Physical Form
Liquid

Packaging & Availability

Packaging Type
Drums,
Pails

Principal Information

Group Principal Number
S000001
Principal
allnex Radcure

Storage & Handling

Storage Conditions
  • Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids.
  • This might cause uncontrollable polymerization of the product with the generation of heat.
  • Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.
  • Procedures that remove or displace oxygen from the material should be avoided.
  • Do not store this material under an oxygen free atmosphere.
  • Dry air is recommended to displace material removed from the container.
  • Wash thoroughly after handling.
  • Keep container tightly closed.
  • Use with adequate ventilation.

Other

Appearance
Clear liquid
Appearance (SDS)
Liquid
Color (SDS)
Clear
IATA/ICAO Proper Shipping Name
Environmentally hazardous substance, liquid, N.O.S.
IATA/ICAO Technical name (N.O.S.)
Mercapto derivative
IATA/ICAO UN Number
UN3082
IMO/IMDG Proper Shipping Name
Environmentally hazardous substance, liquid, N.O.S.
IMO/IMDG Technical name (N.O.S.)
Mercapto derivative
IMO/IMDG UN Number
UN3082
Item Number
ITM17312,
ITM18506,
ITM22587
Odor (SDS)
Acrylate
Other Hazards
Polymerization may occur from excessive heat, contamination or exposure to direct sunlight .
Protect from Freezing
Yes
TDG Canada Proper Shipping Name
Environmentally hazardous substance, liquid, N.O.S.
TDG Canada Technical name (N.O.S.)
Mercapto derivative
TDG Canada UN Number
UN3082
USA/DOT Proper Shipping Name
Environmentally hazardous substance, liquid, N.O.S.
USA/DOT Technical name (N.O.S.)
Mercapto derivative
USA/DOT UN Number
UN3082
Shelf Life & Stability
ValueUnitsTest Method / Conditions
Shelf Life0.0 dd
Physical Properties
ValueUnitsTest Method / Conditions
Density1.14 g/mLg/mLAt 25°C
Storage Temperature39.2-86.0 °F°F
Viscosity90.0-150.0 mPa.smPa.sAt 25°C
SDS Physical and Chemical Properties
ValueUnitsTest Method / Conditions
Boiling Point (SDS)min. 100.0 °C°C
Density (SDS)1.1442 g/cm³g/cm³
Flash Point (SDS)min. 100.0 °C°C
Storage Temperature (SDS)4.0-30.0 °C°C