Products

TEGO® Wet 500 is a silicone-free substrate wetting additive with low foam tendecy. It is highly recommended for water borne coatings with dynamic applications.

EBECRYL® 8405 is an aliphatic urethane tetraacrylate diluted 20% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA)(1). Films of EBECRYL 8405 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, and adhesion with excellent exterior durability and resistance to yellowing.

RHOPLEX® CL-106 acrylic emulsion has been designed for use in factory-applied clear topcoats for wood requiring the highest levels of appearance and surface hardness characteristics. Lacquers based on RHOPLEX® CL-106 acrylic emulsion are translucent in the can and upon application turn clear very rapidly while drying. RHOPLEX® CL-106 acrylic emulsion was developed for use in topcoat finishes and as such does not provide optimum appearance qualities if used as a sealer. In multi-coat systems, the finest overall appearance is obtained when RHOPLEX® CL-106 acrylic emulsion is used over specialized sealer formulations. It is recommended that RHOPLEX® CL-106 acrylic emulsion be used over sealers formulated from RHOPLEX® CL-105 emulsion. In this manner, RHOPLEX® CL-105 emulsion contributes excellent wood fiber wetting, appearance characteristics, and early sandability to the system while RHOPLEX® CL-106 emulsion provides a topcoat with hardness, mar resistance, and clarity. The volatile organic content (VOC) of typically formulated clear topcoat lacquers is less than 2.3 lb/gal and hazardous air pollutants (HAPs) are 0.3 lb HAPs/lb solids.

CYMEL® UI-27-EI Resin is a partially iso-butylated urea resin supplied in a mixture of ethanol and iso-butanol. CYMEL® UI-27-EI Resin is suitable for use in both acid curing wood coating applications and general industrial primer and topcoat formulations. CYMEL® UI-27-EI Resin is not suitable for exterior applications.

TEGO® Glide 130 shows a very good anti-crater effect in solventborne coatings.

HFGEL 120-Z is an organophilic clay recommended for use in non-polar to intermediate polarity solvent ink and coatings systems and requires no polar activator. It is part of the newest generation of organoclays, being highly efficient and easy to disperse. It is designed for use in systems rather than solvents alone and is not suitable for lubricating greases or other binderless products.

EBECRYL® 3720-TP25 is the bisphenol A epoxy diacrylate, EBECRYL 3720, diluted 25% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) (1) to provide a lower viscosity, easier handling product. EBECRYL® 3720-TP25 exhibits light color and fast cure response. Films of EBECRYL 3720-TP25 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and the superior chemical resistance typical of an epoxy resin.

TEGO® Foamex 842 is an effective defoamer solution based on polyether siloxane technology. Contains no fumed silica. Suitable for pigmented and clear formulations.

TEGO® AIREX 902 W is a highly effective and compatible deaerator emulsion based on polyether siloxane technology. Outstandingly effective against micro- and macro-foam.

CYMEL® U-1051 is a partially iso-butylated urea resin supplied in a mixture of iso-butanol and xylene. It has wide compatibility with other film formers and is useful in fast curing industrial baking finishes and low temperature curing conversion varnishes.

TEGO® Foamex 812 Domestic is an effective defoamer concentrate based on polyether siloxane technology. Universal grinding stage defoamer. Can be used in the let-down with sufficient shear. Prevents macro-and micro-foam.

EBECRYL® 4950 is an isocyanate-bearing aliphatic urethane acrylate diluted in 20 % butyl acetate. EBECRYL® 4950 can be combined with traditional hydroxyl (OH) functional binders or OH-acrylate functional binders, such EBECRYL® 4900, to form dual cure coatings (thermal NCO/OH and UV cure). EBECRYL 4950 improves crosslink density, reactivity, and imparts scratch, stain, and abrasion resistance after UV cure.

ACEMATT® OK 520 is a wax-treated, medium particle sized precipitated silica. Providing very high compatibility it can be used in a large variety of coatings.

TEGO® Wet 270 shows excellent anti-crater properties with flow promotion in waterborne, solvent borne, and radiation-curing coatings.

CYMEL® UB-30-B resin is a n-butylated urea crosslinker supplied in n-butanol. Its fast film hardness development combined with excellent adhesion properties makes CYMEL® UB-30-B resin suitable for a wide range of industrial baking applications.