Products

Hatcol® 3812 is aN advanced high-stability polyol esters.Hatcol® 3812 was developed to provide clean lubrication in high temperature environments, especially where lubricant deposits or coking residues are a problem. It contains antioxidants, anti-wear, and anticorrosion additives selected and balanced for optimum performance in a polyol ester lubricant.

Indopol® H-7 is a polybutene from the polyalkene chemical family that functions as a plasticizer, rheology modifier, and thickener.

Clearstrength® E922 is a methacrylate-butadiene-styrene (MBS) core shell impact modifier designed to impart excellent ambient and low temperature toughness to engineering polymers. Clearstrength® E922 impact modifier is aimed to formulate polycarbonate, polyesters and a variety of polycarbonate blends, particularly PC/ABS, for maximum impact.

Indopol® H-1200 is a resin used in plastics and elastomers.

Naugalube® 438L is an antioxidant used in automotive fluids and lubricants, and transmission fluids. It is compatible with mineral oils and synthetic base stocks and applied in engine oils, gear oils, hydraulic fluids, industrial oils, and turbine and compressor oils.

LOTADER® 18603T is a reactive ethylene-methyl acrylate copolymer, it has been designed to coextrusion application with polyethylene, ethylene copolymers, polyamides, EVOH, PET and PS. It can also be used as a coupling agents for HFFR compounds as well as impact modifiers for polyamides. LOTADER® 18603T is compatible with most tackifying resins and waxes and can be used in hot melt adhesives formulations. LOTADER® 18603T is also suitable to produce thermo-adhesive films for solid substrates like PA, PET and PU films, aluminum, foils.

REAFREE® 5709 is a binder and resin used in powder coating applications.

LOTADER® 4613T is a random ethylene - methyl acrylate - maleic anhydride terpolymer. LOTADER® 4613T is an ultra-versatile ready-to-use tie layer resin for extrusion lamination/coating, not intended to be diluted. LOTADER® 4613T provides excellent adhesion in direct bonding onto printed, reverse-printed and plain films (OPET, OPP, CPP, OPA). LOTADER® 4613T for extrusion coating lamination onto foil, metallized films, paper and board.

Hybase® C-231 is a 300 TBN oil soluble crystalline over based calcium sulfonate. Hybase® C-231 is a unique, patented additive designed for excellent solubility and clarity in lubricating oils. It is intended for use as a supplementary lubricity agent in crankcase lubricants as well as a detergent and rust inhibitor.

Indopol® L-3 is a polybutene resin from the polyalkene and polyolefins chemical families, functioning as a plasticizer, rheology modifier, and thickener in plastics and elastomers.

Indopol® H-1900 functions as an emollient, solubilizer, dispersant, viscosity modifier, and stabilizer in cosmetic ingredients.

Naugalube® 750 is an antioxidant used in appliances and electronics, automotive fluids and lubricants, cold chain and insulation, marine fluids and lubricants, transmission fluids, and general fluids and lubricants. It is suitable for engine oils, gear oils, hydraulic fluids, and turbine and compressor oils.

MARLOX® RT 42 is one of the many low foaming EO/PO non-ionic surfactants produced by Sasol Chemicals in Germany. These alcohol alkoxylates are based on Sasol’s wide range of linear and semi linear fatty alcohols. They are produced by alkoxylation of the fatty alcohols to varying degrees using ethylene oxide and propylene oxide. MARLOX RT 42 is a clear to slightly turbid liquid at room temperature and essentially 100% active.

LOTADER® 9318T is a random ethylene-vinyl acetate-maleic anhydride terpolymer (EVA- MAH). As an ethylene copolymer, LOTADER® 9318T is compatible with PE in all proportions, and with most ethylene copolymers. Vinyl acetate brings softness, flexibility, and polarity while maleic anhydride brings reactivity, leading to versatile adhesive properties to polar and non-polar substrates. As a result of high-pressure polymerization in tubular reactor, LOTADER® 9318T also exhibits high transparency (low haze). LOTADER® 9318T can be used to produce thermo-adhesive films for solid substrates like PA, PET and PU films, aluminium foils, fiber mats, foams. LOTADER® 9318T is also suitable as a tie layer between polyethylene and polyamide in blown film, cast film or in tubes co-extrusion. It can be used as a coupling agent in cables compounds formulations.

Indopol® H-8 is a polybutene plasticizer from the polyalkene chemical family.