Products

Bayferrox® 3420 is a yellow iron oxide pigment, also known as ferric oxide yellow. It is a single-ingredient pigment. It is used primarily as a pigment in various industrial applications.

Bayferrox® 360 is an iron oxide pigment, commonly known as Pigment Black 11. It is a single-ingredient product, used primarily as a pigment in various industrial applications, including plastics and elastomers. It is also referred to by several synonyms, such as ferric ferrous oxide and iron(II,III) oxide.

D.E.R.® 6224 is a low molecular weight solid reaction product of epichlorohydrin and bisphenol A. D.E.R.® 6224 Epoxy Resin is designed for decorative powder coating applications requiring excellent flow and gloss. The low melt viscosity and fast reactivity of D.E.R. 6224 Resin make this resin particularly suitable for the formulation of hybrid powder coatings. Improved flow and surface finish can be obtained when using D.E.R.® 6224 Solid Epoxy Resin in combination with polyester resins using polyester to epoxy ratios from 50/50 up to 80/20 parts by weight. The resin can also be used alone with conventional curing agents for pure epoxy powder coatings.

RHOPLEX® HG-706 is the new binder is designed for interior and exterior VOC compliant gloss and semigloss enamels, allowing formulators to produce high-performance coatings at 50 g/l VOC. RHOPLEX® HG-706 takes advantage of innovative technology to improve enamel performance over that of conventional latex polymers. The combination of an all-acrylic backbone and ambient-cure crosslinking technology provides superior performance in formulations ranging from 50 to 150 g/l VOC. Enamels based on RHOPLEX® HG-706 provide excellent adhesion, block, and stain removal.

D.E.H.® 4909 Epoxy Curing Agent is a modified polyamine based curing agent for epoxy resins.

Bayferrox® 511 is an iron oxide red pigment used primarily in building materials such as plasters, coatings, and roofing tiles. It offers excellent durability, UV protection, and color consistency in various applications. This pigment is commonly used in the construction and coatings industries for decorative finishes.

RHOPLEX® CL-104 Waterborne Acrylic Copolymer, yield clear wood coatings which shed water and coalescent rapidly, resulting in excellent early print resistance properties. However, in extreme ambient conditions (temperatures approaching 100°F (38°C) and/or very low relative humidity), some of these first generation print-resistant products can trap bubbles when spray applied, causing film haze and clarity loss. In contrast, RHOPLEX® CL-204 Acrylic Emulsion is specifically engineered to minimize this microfoam entrapment by slowing the film-set process which occurs under extreme ambient conditions, while still maintaining acceptable early print resistance properties.

RHOPLEX® SG-30 is a revolutionary emulsion designed to meet the needs of new regulations for 150 g/L VOC semigloss interior and exterior architectural paints. RHOPLEX® SG-30 provides paint manufacturers an opportunity to formulate at lower VOC while maintaining key properties of conventional (250 g/L VOC) semigloss architectural paints.The results of laboratory tests comparing the performance properties of RHOPLEX® SG-30 formulated to 150 g/L VOC to a conventional 250 g/L VOC semigloss emulsion are included in this bulletin.

ACRYSOL™ RM-12W is a solvent-free, nonionic rheology modifier designed to offer high low-shear viscosity with an extremely shear thinning rheology and excellent thickening efficiency. Unlike conventional thickeners, ACRYSOL™ RM-12W offers excellent sag resistance with minimal effect on flow and leveling. While not capable of providing true thixotropy, it can offer advantages typical of thixotropes. These properties include improved brush/roller loading, good anti-drip properties, good in-can structure, and excellent flow, sag balance.

D.E.H.® 546 curing agent is a low viscosity modified cycloaliphatic amine intended for ambient temperature curing of liquid epoxy resins.

Dynasylan® IBTEO is a clear colorless liquid and soluble in common non­polar organic solvents (e.g. petroleum ether, toluene). However its low volatility and viscosity make Dynasylan® IBTEO an easy­to­handle additive. During the hydrolysis reaction between water and Dynasylan® IBTEO a certain amount of ethanol (VOC) is released.

AEROSIL® 200 VS is a densified hydrophilic fumed silica with a specific surface area of 200 m²/g.

D.E.H.® 534 cycloaliphatic amine hardener is used as a curing agent for epoxy resins for rapid set and low temperature cure systems with high gloss and strength. It imparts very rapid development of properties and results in a blush-free product with good water spot resistance and very good chemical resistance. It can also be used as an accelerator for other hardeners in coatings and civil engineering applications.

DLVE™ 52 is a low viscosity epoxy resin that facilitates high solids coating formulations with low volatile organic compound (VOC) emissions, while minimizing compromises in performance. DLVE™ 52 be cured using multiple types of curing agents.