Products

Exolit® OP 550 (LV) can be used for flexible polyurethane foams. It is a medium-viscosity liquid and it is based on a non-halogenated phosphorus polyol with a functionality of approx. 2. The product is a reactive flame retardant that can be chemically reacted into the polymeric matrix, preventing unwanted migration from the foam. Therefore, very low fogging values can be achieved which meet the most stringent emission standards for PU flexible foams in the automotive industry+elastomers.

Focus DMMP - Odorfree is a high phosphorus content additive flame retardant with powerful solvency. It is an effective viscosity depressant and is used in highly filled, unsaturated polyester resin fiberglass systems. Focus DMMP - Odorfree is not recommended either for direct application to or for use in formulations that will be applied to fabrics intended for apparel use. The term "flame retardant" is a relative one and is not intended to indicate the hazard of materials containing flame retardants under actual fire conditions.

Focus ChloroPar W-40 is a chlorinated compound based on C21-34 alkanes. This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

Focus ChloroPar W-40AO is a chlorinated very long chain alkane (C24-28). This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

Exolit® AP 435 is a fine-particle ammonium polyphosphate (phase II) optimized for low viscosity in aqueous suspension and intumescent coatings. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic and non-flammable.

Focus ChloroPar W-50AO is a chlorinated very long chain alkane (C24-28). This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

Hostavin® NOW® PILLS XP is a non-halogenated flame retardant especially designed for polyolefins fibers and films.

Exolit® OP 1230 is a white, fine-grained powder based on an organic phosphinate. The product is non-hygroscopic and it is insoluble in water and organic solvents. Exolit® OP flame retardants for polyamides are all based on aluminum diethyl-phosphinate (= DEPAL). The pure substance DEPAL is sold as Exolit OP 1230 and in combination with synergists as Exolit® OP 13xx types. Exolit® OP 1230 is the first non-halogenated flame retardant which can withstand the demanding requirements of this high end segment of engineering plastics.

Focus TEP is an additive flame retardant with high phosphorus content and powerful solvency. It is an aschromatic transparent liquid that fully dissolves in water and easily dissolves in organic solvents of ethanol, ethyl ether, benzene. etc.

Exolit® OP 935 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit OP 935 can easily be dispersed in solvents like acetone or MEK.

Exolit® OP 560 is a flame retardant that can be used for flexible polyurethane foams. It is a medium-viscosity liquid and it is based on a non-halogenated phosphorus polyol. The product is a reactive flame retardant which can be chemically reacted into the polymeric matrix. Therefore, very low fogging values can be achieved which meet the most stringent emission standards for PU flexible foams in the automotive industry.

AddWorks LXR 920 is a halogen-free flame retardant for polyolefin films or fibers.The superior thermal stability results in low smokes and low odor generation during processing, even at high production temperatures.

Exolit® OP 1400 is a non-halogenated flame retardant based on organic phosphinates for reinforced polyamide 6, polyamide 66 and high temperature polyamides. The produt achieves its flame retardant effect through a combined gas phase and condensed phase mode of action. Exolit® OP 1400 is based on a new chemical substance which currently being registered in various national and regional chemical inventories.

Exolit® OP 1240 is a flame retardant based on an organic aluminum phosphinate which is a thermally stable white solid without any hazard classification or labeling. It can be easily compounded into polyesters and subsequently processed again to manufacture flame retarded parts used in consumer or industrial products.

Exolit® OP 1311 is a non-halogenated flame retardant based on organic phosphinates. The product achieves its flame retardant effect through intumescence. The thermoplastic polymer with Exolit® OP 1311 foams and crosslinks on exposure to flame and forms a stable char at the surface acting as a barrier. The protective layer provides a heat- insulating effect, reduces oxygen access and prevents dripping of molten polymer. Exolit® OP 1311 is a white powder.