Products

EBECRYL® 885 is a trifunctional polyester acrylate oligomer. Films of EBECRYL® 885 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. EBECRYL® 885 is recommended for parquet floor coating, wood furniture coating applications and flexible coatings for metal.

EBECRYL® 4654 is an aliphatic urethane acrylate supplied at 60% solids in n-butyl acetate. Films of EBECRYL® 4654 are physically dry after evaporation of the solvent. EBECRYL® 4654 exhibits high reactivity in ultraviolet (UV) and electron beam (EB) energy curable coatings and yields hard polymers. Coatings based on EBECRYL® 4654 demonstrate good exterior durability, resistance to yellowing, and chemical and mechanical resistance properties.

EBECRYL® 895 is a dipentaerythritol hexaacrylate belonging to the acrylics and acrylates chemical family. It functions as a monomer and oligomer in CASE ingredients.

EBECRYL® LED 04 is an acrylated polyamine that can be added as a co-resin to UV curable formulations. EBECRYL® LED 04 when combined with an appropriate photo initiator system transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photo initiators. Coating and inks based on EBECRYL® LED 04 exhibit a low odor after UV or EB curing. Due to its hydrophobic nature EBECRYL® LED 04 can also be used in offset inks applications as a replacement of aminobenzoate synergists.

EBECRYL® 8800-20R is an aliphatic urethane acrylate diluted with the reactive diluents tripropylene glycol diacrylate (TPGDA) (1) and ethoxyethoxyethyl acrylate (EOEOEA)(2). Films of EBECRYL® 8800-20R cured by ultraviolet light (UV) or electron beam (EB) exhibit toughness, flexibility, good exterior durability and resistance to yellowing.

EBECRYL® 8296 is an aliphatic urethane acrylate designed for use in applications requiring haptic properties (e.g. “soft touch”). Films of EBECRYL® 8296 cured via exposure to ultraviolet light (UV) or electron beam (EB) are soft, flexible, and resistant to yellowing coupled with high surface tack.

EBECRYL® 264 is an aliphatic urethane triacrylate diluted 15% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA). Films of EBECRYL® 264 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, abrasion resistance, and are resistant to yellowing.

EBECRYL® 605/40 is a bisphenol A epoxy diacrylate diluted approximately 40% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) (1) to provide a lower viscosity, easier handling product. EBECRYL® 605/40 exhibits light color and fast cure response. Films of EBECRYL 605/40 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and superior chemical resistance.

UCECOAT® 7849 is a radiation curable polyurethane dispersion which is tack- free before cure and after water evaporation. It was developed for wood coatings, but can also be used for other applications. Because of its non- irritant nature and low viscosity, it and can be applied safely by spray coating and curtain coating.

EBECRYL® 3701 is a modified bisphenol A epoxy diacrylate. EBECRYL® 3701 imparts flexibility and toughness to ultraviolet light (UV) or electron beam (EB) cured coatings and inks while maintaining such desirable properties as fast cure response and superior chemical resistance that are typical of standard epoxy acrylates.

EBECRYL® 809 is a modified polyester acrylate designed to exhibit greater flexibility and impact resistance than typical polyester acrylates. Films of EBECRYL® 809 cured by ultraviolet light (UV) or electron beam (EB) provide good flexibility, high gloss, toughness and surface hardness.

EBECRYL® 4396 is an undiluted isocyanate aliphatic functional urethane acrylate designed for use in UV/EB coatings and in two-component dual cure systems for coatings on wood, plastic, and metal.

EBECRYL® 1859 is a high molecular weight acrylate especially developed for high speed UV, HUV, UV LED, and EB cured offset lithographic inks. EBECRYL® 1859 exhibits excellent lithographic behavior, very good pigment wetting and high reactivity.