Products

Exolit® AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and non-flammable.

AddWorks® IBC 760 is a mixture of a UV absorber, hindered amine light stabilizer (HALS) and antioxidant without any hazard labeling and designed to provide outstanding performance in SMP sealants in terms of light and heat stabilization. Available in micronized powder form, AddWorks® IBC 760 prolongs the service life of SMP sealants as it reduces cracking and yellowing that typically occurs if exposed to strong sunlight or high temperature conditions. The performance is evident when tested against current benzotriazole containing solutions in the market. Our new stabilizer solution is an ideal ingredient to formulate high performance SMP sealants used for construction, automotive and other outdoor applications.

Exolit® OP 1260 is a non-halogenated Flame Retardant for Polyester based on organic phosphinates. The product achieves its flame retardant effect through a combined gas phase and condensed phase mode of action. Exolit® OP 1260 is based on commercially available chemical substances registered in inventories worldwide.

TEGO® Rad 2650 is a radically cross-linkable release additive, providing utmost slip, strong release, and efficient defoaming properties. Ideal for pigmented inks.

Exolit® RP 6520 is a brown-red paste, and is a thixotropic blend of castor oil with stabilised, microencapsulated red phosphorus. The paste form allows safe and simple handling and thus processing is made easier. The thixotropic nature of this concentrate hinders the sedimentation process and simplifies the re-homogenisation after long storage periods.

Exolit® OP 1230 is a white, fine-grained powder based on an organic phosphinate. The product is non-hygroscopic and it is insoluble in water and organic solvents. Exolit® OP flame retardants for polyamides are all based on aluminum diethyl-phosphinate (= DEPAL). The pure substance DEPAL is sold as Exolit OP 1230 and in combination with synergists as Exolit® OP 13xx types. Exolit® OP 1230 is the first non-halogenated flame retardant which can withstand the demanding requirements of this high end segment of engineering plastics.

PARALOID™ A-11 provides excellent color and color retention, high hardness, and excellent resistance to alcohol and water. It has properties similar to PARALOID™ A-11 Thermoplastic Solution Resins and is used in similar applications. PARALOID™ A-11 Solid Grade Thermoplastic Acrylic Resin is compatible with several other PARALOID™ A-11 resins such as PARALOID™ A-21 Solid Grade Thermoplastic Acrylic Resin, PARALOID™ B-44 Solid Grade Thermoplastic Acrylic Resin, and PARALOID™ B-82 Solid Grade Thermoplastic Acrylic Resin and with other film formers including cellulosic, vinyl, silicone, and epoxy.

Exolit® AP 435 is a fine-particle ammonium polyphosphate (phase II) optimized for low viscosity in aqueous suspension and intumescent coatings. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic and non-flammable.

Exolit® OP 1312 is a non-halogenated flame retardant based on organic phosphinates. The product achieves its flame retardant effect through intumescence. The thermoplastic polymer with Exolit® OP 1312 foams and crosslinks on exposure to flame and forms a stable char at the surface acting as a barrier. The protective layer provides a heat- insulating effect, reduces oxygen access and prevents dripping of molten polymer. Exolit® OP 1312 is a white powder.

Exolit® IFR 36 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® IFR 36 differs in its mode of action from chlorine- or bromine-containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat insulating effect and reduces further oxygen access.

Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit® AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit® AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat-insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gasses, lower formation of toxic smoke gasses are of great interest.

Ceridust® 6721 is a micronized, amide modified polypropylene wax.

Exolit® AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from ammonium polyphosphate by micro-encapsulation with melamine resin according to Clariant’s own method. Exolit® AP 462 is a fine-particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non-hygroscopic and non-flammable.

Ceridust® 2020 TP is a micronized synthetic wax, recommended for solvent based coatings and inks, as well as for powder coating application. Ceridust® 2020 TP enhances rub and scratch resistance, improves slip properties and reduces gloss for all kind of printing inks and coatings. It is also a processing agent for powder coatings to increase output and flowability of powder and matting agent therefore.

Ceridust® 1310 TP is a micronized rice bran wax based blend developed for industrial coatings and printing inks. Effective as for scratch and abrasion resistance.