Products

ZINC STEARATE SW-100 is a medium bulk density, fine white powder.

Bermocoll® MT 500 is a strongly modified non-ionic, water soluble cellulose ether, intended as a water retaining and consistency improving additive to cement based mortars. Bermocoll® MT 500 contains methyl, ethyl and hydroxyethyl substituents giving unique balance between workability and strength.

Europrene® SOL TH 2312 is a linear block copolymer obtained by selective hydrogenation of styrene - butadiene-styrene block copolymers. The polymer is based on styrene and ethylene/butylene, where bound styrene content is 30%wt. A non-staining, TNPP free antioxidant system is added during the production process.

D.E.H.® 582 cycloaliphatic amine hardener is used as a curing agent for epoxy resins resulting in a non-blushing product with good water spot resistance and excellent chemical resistance. It has low color and good light stability, offers good low-temperature cure and can also be used as an accelerator for other hardeners. It has excellent adhesion to wood, metal, fiber-glass and concrete and is suitable for construction and civil engineering applications.

CARPOL® TEAP-265 is a triethanolamine-initiated polyether polyol. The resultant material has a nominal functionality of three and a typical hydroxyl number of 635. This polyol’s functionality and short-chained nature make it optimal for use in rigid foam. Primarily used as a rigid polyol modifier, CARPOL® TEAP-265 can be used to cut the high viscosity seen with most sucrose based rigid polyols while acting as a good crosslinker. In addition, this polyol contains amine which enhances the overall system reactivity.

SIPERNAT® 50 is a carrier silica with particularly high absorbency, it has the capacity to convert liquid active substances, or solutions into powders. Concentrates of up to 75 percent can be produced using SIPERNAT 50. It is also used as a grinding aid for fatty products. SIPERNATⓇ represents a specific product range of precipitated silica, aluminium and calcium silicates.

D.E.R.® 916 Epoxy Resin is a modified, semi-solid, epoxy novolac resin emulsified in water.

Preventol® P 91 MV is a preservative used in metalworking fluids. It functions as a preservative in case ingredients, cleaning ingredients, fluids and lubricants, and industrial additives.

D.E.H.® 804 is an amine curing agent dissolved in water and designed to emulsify epoxy resins. The product contains no VOC according to the European Directive 2004/42/EC and no alkyl phenol. D.E.H.® 804 is an amine curing agent dissolved in water and designed to emulsify epoxy resins. The product contains no VOC according to the European Directive 2004/42/EC and no alkyl phenol. Benefits D.E.H. 804 serves as a curing agent for self-leveling floorings. When cured with D.E.R. 3221 above a D.E.H. 805 based primer, D.E.H.® 804 did not contribute to significant emissions, such that the full flooring system could pass the AgBB evaluation scheme and get labeled A+ according to the French labeling of construction products evaluation scheme. D.E.H.® 804 is also suitable for the development of flooring on green concrete or where water is expected to migrate from the substrate.

D.E.H.® 580 is a cycloaliphatic amine used as a curing agent for epoxy resins in applications requiring self leveling, chemical and blush resistance. It results in a blush-free product with excellent chemical and water spot resistance.

Bluesil™ FLD 47 V1 000 is straight chained polydimethylsiloxanic fluids.

ALFOL 8 Alcohol is a high purity, petrochemical-based 1-octanol (also known as octyl alcohol). It is a colorless liquid with a sweet pungent odor. ALFOL 8 Alcohol is classified as readily biodegradable in standard ready biodegradability tests. ALFOL 8 Alcohol can be esterified, ethoxylated, propoxylated, sulfated, oxidized, etc. Sasol Chemicals ALFOL alcohols are physically and chemically equivalent to corresponding oleochemical-based alcohols derived from such sources as coconut oil or palm oil.

HYDROGRAL® G is a glycerol ester of partially hydrogenated rosin. It is specially recommended to improve oxidation resistance and long-term adhesive performances of adhesives such as insulation sealants or pressure sensitive adhesives.

SIPERNAT® 320 DS Coating is a very finely ground silica with good thickening and excellent flow improving properties. SIPERNAT® represents a specific product range of precipitated silica, aluminium and calcium silicates.