Consumer Goods

Calcinate® C-400W is a 400 TBN modified overbased calcium sulfonate containing a high level of crystalline "calcite" calcium carbonate. Calcinate® C-400W is designed to provide excellent extreme pressure, anti-wear and anti-corrosion properties to a lubricant. It is recommended for use in rust protective and forming oils as a chlorine replacement to impart enhanced extreme pressure characteristics of a crystalline overbased calcium sulfonates. This product is used as a component in metal working fluids where the unique lubricity and extreme pressure properties of calcium carbonate are utilized. Calcinate® C-400W is compatible with most mineral base oils, white oils, and synthetic base stocks.

ELIX™ 152 I is a high rubber content ABS copolymer used for polymers modification purposes.

D.E.H.® 802 is a polyamine adduct waterborne curing agent with optimized rheology specially designed to provide superior performance in roller applications. It can be used with liquid Bisphenol A and/or Bisphenol F epoxy resins. It is supplied at 50 % solids in water.

D.E.H.® 502 aliphatic amine hardener is used as curing agent for epoxy resins. It provides good solvent and chemical resistance and offers good low temperature cure.

D.E.H.® 804 is an amine curing agent dissolved in water and designed to emulsify epoxy resins. The product contains no VOC according to the European Directive 2004/42/EC and no alkyl phenol. D.E.H.® 804 is an amine curing agent dissolved in water and designed to emulsify epoxy resins. The product contains no VOC according to the European Directive 2004/42/EC and no alkyl phenol. Benefits D.E.H. 804 serves as a curing agent for self-leveling floorings. When cured with D.E.R. 3221 above a D.E.H. 805 based primer, D.E.H.® 804 did not contribute to significant emissions, such that the full flooring system could pass the AgBB evaluation scheme and get labeled A+ according to the French labeling of construction products evaluation scheme. D.E.H.® 804 is also suitable for the development of flooring on green concrete or where water is expected to migrate from the substrate.

PLATAMID® HX 2592 T is a specialty thermoplastic co-polyamide hot melt adhesive available in pellet form. This low to medium melt viscosity grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion. PLATAMID® HX 2592 T offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal natural fibers, and more)

Solumer™ 8705 is an ethylene-octene copolymer produced via Nexlene™ technology. It performs well in a wide range of general purpose thermoplastic elastomer applications and has excellent flow characteristics.

Agimid® 2153 BOO is a polyamide 12 reinforced with 30% of glass fibers dedicated to injection molding. The main applications are car keys and fittings for the automotive and industrial markets.

Hatcol® 2850 is a base stock and oil used in gear oils and lubricants.

CARPOL® GSP-520 is a glycerin/sucrose-initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a nominal functionality of five and a typical hydroxyl number of 520. Due to this polyol’s high functionality, it is typically used in rigid foam and its applications. Blending CARPOL® GSP-520 with other polyether polyols allows for foam systems with high to lower degrees of crosslinking.

DzBh Baling® YH-561T is a linear and radial hydrogenated styrene/butadiene block copolymer designed for low hardness applications with good oil adsorption.

MACROLEX® Red A is a dye used in plastics and elastomers for household goods and toys.

Tekspro® 5332 is an anionic aliphatic polyester - polyurethane dispersion which can be used in the field of labor protection gloves. It can be mixed with nitrile lotion to produce labor protection gloves with soft hand feel and excellent wear resistance.

AP 3120 is a low viscosity, low color hardener for epoxy resins based clear coatings.

MACROLEX® Fluorescent Yellow 10GN is a dye used in plastics and elastomers for household goods and toys. It is compatible with ABS, PC/ABS alloy, PMMA, PA 6, polycarbonates, PET, polystyrenes, SAN, and unplasticised PVC-U, and is suitable for both opaque and transparent dyeing.