Enhanced TDS
Identification & Functionality
- Blend
- No
- CI Name
- CI Number
- Chemical Family
- Pigment Type
- Product Code
- MITM07157
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Applications
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000008
- Principal
Storage & Handling
- Storage and Shelf Life Information
- General storage conditions:Protect against weathering. Store in a dry place and avoid extreme fluctuations in temperature.
- Maximum storage temperature:When storing large quantities of pigments, temperatures above 80°C must be avoided as an alteration (oxidation) of the pigment may be caused by heat.
- Special conditions for opened packaging:Bayferrox® 130 M has an excellent shelf life. We recommend that this product is used within ten years of the date of manufacture and limit our product warranty to this period. During the first ten years after the date of manufacture we are able to ensure compliance with this specification, provided the material has been stored as stated above and the packaging materials remain undamaged. It must be taken into account that the packaging mean can have a shelf life considerably shorter than the one for Bayferrox® 130 M. All recommendations and warnings given on the packaging must strictly be adhered to. Deviations from storage conditions can lead to undesired changes on side of the packaging materials. These succumb to aging which may also lead to compromising their capability. Concerning their estimated service life we differentiate between the following packaging materials:
- All kinds of bags (Paper and PE) -5 years
- All kinds of Bulk bag -3 years
- With respect to our Bulk Bags we recommend to avoid UV-radiation because the sewing material of the lifting loops is stabilized against degradation by UV-radiation for appr. 1000 h incident sun radiation for the climate of Central Europe. A more intense sun radiation can shorten this period significantly. In cases of doubt the lifting loops must be checked thoroughly.
Other
- Appearance
- Red pigment- high performance micronised powder
- Appearance (SDS)
- Powder
- Color (SDS)
- Red
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Odorless
- Other Hazards
- None known
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Difference max. 1.0 - Delta E, Binder: Full Shade Color Difference max. 0.8 - Delta E, Titanium dioxide reduction (1:5) Color Intensity 95.0-105.0 % % Color Scale -0.6-0.6 CIELAB CIELAB Delta a, Binder, Full shade Color Scale -0.5-0.5 CIELAB CIELAB Delta a, Binder: Test paste based on a non-drying alkyd resin ;Reduction 45 with titanium dioxide 1:5, color values after matching of the tinting strength parameter Y, i.e. A L *= 0 Color Scale -0.7-0.7 CIELAB CIELAB Delta b, Binder: Full shade Color Scale -0.5-0.5 CIELAB CIELAB Delta b, Binder: reduction with titanium dioxide tronox® R-KB-2 (1 : 5) Color Scale -0.8-0.8 CIELAB CIELAB Delta C, Binder: Full shade Color Scale -0.6-0.6 CIELAB CIELAB Delta C, Binder: Reduction with titanium dioxide (1 : 5) Color Scale -0.8-0.8 CIELAB CIELAB Delta H, Binder, Full shade Color Scale -0.6-0.6 CIELAB CIELAB Delta H, Binder: Reduction with Titanium dioxide (1:5) Color Scale -0.4-0.4 CIELAB CIELAB delta L, binder, full shade - Chemical Properties
Value Units Test Method / Conditions Loss on Ignition max. 0.7 % % DIN 55913 pH 5.0-8.0 - DIN EN ISO 787-9 - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 5.0 yr yr - Physical Properties
Value Units Test Method / Conditions Apparent Tamped Density 0.7-1.1 g/mL g/mL DIN EN ISO 787-10 Density 5.0 g/mL g/mL DIN EN ISO 787-10 Moisture Content max. 0.3 % % DIN EN ISO 787-2 Oil Absorption 27.0 g/100g g/100g DIN EN ISO 787-5 Particle Size 0.17 µm µm Scanning Electron Microscopy (SEM) Sieve Fractionation (Retained) max. 0.002 % % DIN EN ISO 787-7 0.045 mm sieve Water Solubles max. 0.4 % % DIN EN ISO 787-3 - Material Composition
Value Units Test Method / Conditions Iron Concentration min. 99.2 % % α - Iron(III) Oxide Content - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Bulk Density (SDS) 300.0-1000.0 kg/m³ kg/m³ Density (SDS) 5.0 g/cm³ g/cm³ at 20°C Melting Point (SDS) min. 1832.0 °F °F pH (SDS) 4.0-8.0 -