Products

TEGO® Therm HPG 6806 is a purely mineral product based on silicone dioxide. TEGO® Therm HPG 6806 can be combined with other materials to produce thermal insulation coatings.

Silcolapse® 426R is a non-ionic aqueous emulsion based on polydimethylsiloxane oil. It has 30% active matter content and is recommended for the prevention, control or elimination of foam in aqueous systems.

Silcolapse® 426R U1 is a non-ionic aqueous emulsion based on polydimethylsiloxane oil. It has 30% active matter content and is recommended for the prevention, control or elimination of foam in aqueous systems.

Dynasylan® 1146 diaminofunctional silane may be used in coatings, adhesives, and sealants to improve the adhesion of amino­reactive resins. These are resins such as silicones (RTV), two­part urethanes, silylated urethanes, MS polymers, and two­part epoxies to inorganic surfaces, plastic surfaces, and inorganic fillers. Dynasylan® 1146 silane is characterized by randomly­distributed linear and cyclic oligosiloxanes and fullfills the OECD polymer definition. Its low volatility and viscosity make compounding easy. Dynasylan® 1146 silane produces significantly less by- product (VOC) and has a correspondingly low odor level during application.

Bermocoll® Prime 1500 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance. and superior color stability. It improves the consistency, the stability, and the water retention of water based paints.

HFGEL 120-D17 is a kind of modified organoclay, which has the characteristics of high purity, light gel color and good heat stability. It is a good rheology modifier for paints and inks in low, medium and high polarity solvent systems such as aliphatic hydrocarbons, esters and ketones. It is self-activated in medium to high polarity solvent systems such as xylene - esters (such as butyl acetate) and xylene - ketones (such as cyclohexanone), and sometimes an appropriate amount of polar activator is helpful for dispersing. It requires to add polar activators to help disperse in the aromatic hydrocarbons such as toluene, xylene, aliphatic hydrocarbons such as 200 # solvent oil, white oil (mineral spirit) and other low polarity solvent systems.

Bermocoll® Prime 1000 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance. and superior color stability. It improves the consistency, the stability, and the water retention of water based paints.

MKOREZ® MK-140 is made from highly purified monomers such as styrene and/or alpha methyl styrene. This pureness of raw materiaals can make the resin has water white color with high aromaticity than that of conventional hydrogenated resins at the same time. This has good heat stability and excellent potential as a modifier in high shear adhesive compounds based on SBCs (SIS,SBS or SEBS etc) This can be also used as additive in other kinds of adhesive or various elastomeric compounds as well.

SMY-LT is an easily dispensable rheological additive for waterborne systems. SMY-LT can disperse in water, forming a suspension gel. It provides excellent thickening and anti-settling properties, with good heat stability. It can also improve the open time for the coating film.

MKOREZ® MK-85 is made from highly purified monomers such as styrene and/or alpha methyl styrene. This pureness of raw materiaals can make the resin has water white color with high aromaticity than that of conventional hydrogenated resins at the same time. This has good heat stability and excellent potential as modifer in LAT (Low Application Temperature) adhesive compounds badsed on SBCs (SIS, SBS,or SEBS etc) This can be also used in other kinds of adhesive like EVA based hot melts and various rubber compounds as well.

WANNATE® HTBL-275MS is a 3,5-dimethylpyrazole blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in 17% solvent naphtha 100 and 8% propylene glycol monomethyl ether acetate, colorless to slightly yellowish clear liquid.

Bayferrox® 130 BM is a single-ingredient inorganic pigment, known as Pigment Red 101. It is composed of iron(III) oxide. This pigment is commonly used for its color stability and durability in various applications.

Preventol® A 12-TK 48 is for the manufacture of aqueous and solvent formulations for preservation of wood composites, wood in above-ground and in ground applications, leather, films, glues, adhesives, and metalworking fluids.

Hostanox® O 3P is a highly efficient phenolic antioxidant with high resistance against hydrolysis, providing long term heat stabilization to polyolefins and polyamide especially for applications where the final article comes in contact with extractive media such as water, fat etc.