Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- Product Code
- MITM16569
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
Applications & Uses
- Adhesive & Sealant End Applications
- Compatible Substrates & Surfaces
- Product Applications
Bermocoll® M 10 is used in tile adhesives and grouts to improve the workability, consistency, water retention and adhesion.
Properties
- Physical Form
- Soluble In
- Note
Bermocoll® M 10 Q is a medium viscosity grade of methyl ethyl hydroxyethyl cellulose.
Regulatory & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
- Quality Standards
Safety & Health
- Safety Precautions
- Bermocoll® M 10 is intended for dry mixing with other powder materials and should not be used for direct dissolving in water.
- At the temperatures above 250°C (480°F), charring of Bermocoll® M 10 will occur.
- At high temperatures and in contact with an open flame, Bermocoll® M 10 will burn slowly with the characteristics of cellulose.
Packaging & Availability
- Packaging Information
- Care should be taken to prevent ignition from heat, spark, open flames or hot surface.
- Bermocoll® M 10 is packed in a polyethylene bag. Net weight 15 kg. We recommend emptying the bags from the bottom.
- The empty bags can be recycled or burned. In unopened bags, Bermocoll® M 10 can be stored for several years.
- In opened bags, the moisture content of Bermocoll® M 10 will be influenced by the air humidity.
- At the temperatures above 250°C (480°F), charring of Bermocoll® M 10 will occur.
- At high temperatures and in contact with an open flame, Bermocoll® M 10 will burn slowly with the characteristics of cellulose.
Principal Information
- Group Principal Number
- S003175
- Principal
Storage & Handling
- Storage Conditions
- In unopened bags, Bermocoll® M 10 can be stored for several years.
- In opened bags, the moisture content of Bermocoll® M 10 will be influenced by the air humidity.
Other
- Appearance
- Whitish powder
- Appearance (SDS)
- powder
- Color (SDS)
- Off-white
- Dust Explosion Class (SDS)
- St2
- Flammability (SDS)
- Combustible solids
- Odor (SDS)
- Odorless
- Other Hazards
- Dust can form an explosive mixture in air
- Oxidizing Properties (SDS)
- Not oxidizing
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions pH 7.0 - at 1% solution - Physical Properties
Value Units Test Method / Conditions Particle Size max. 600.0 µm µm at 98 % Viscosity 750.0-1200.0 mPa.s mPa.s Brookfield LV Viscometer at 20°C, 1% solution - Material Composition
Value Units Test Method / Conditions Salt Content max. 6.0 % % Volatile Content max. 5.0 % % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) 338.0 °F °F DIN EN 15188 Autoignition Temperature (SDS) 752.0 °F °F DIN EN 50281-2-1 Burning Number (SDS) 5.0 - Water/Oil Decomposition Temperature (SDS) min. 212.0 °F °F Deflagration Index (SDS) 200.0-300.0 bar.m/s bar.m/s Lower Flammable Limit (SDS) 30.0 g/m³ g/m³ Minimum Ignition Energy (SDS) min. 10.0 MJ MJ Viscosity (SDS) 750.0-1200.0 mPa.s mPa.s at 20°C, pH 7 at 1% solution. pH (SDS) 6.0-8.0 - concentration : 0.5%