Products

Bermocoll® M 10 is a non-ionic, water soluble cellulose ether intended as a water retaining and consistency improving additive to cement based mortars. Bermocoll® M 10 contains methyl, ethyl and hydroxyethyl substitution giving a unique balance between workability and strength.

EBECRYL® 809 is a modified polyester acrylate designed to exhibit greater flexibility and impact resistance than typical polyester acrylates. Films of EBECRYL® 809 cured by ultraviolet light (UV) or electron beam (EB) provide good flexibility, high gloss, toughness and surface hardness.

EBECRYL® 8301-R is a hexafunctional aliphatic urethane acrylate that provides extremely fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL® 8301-R exhibit high hardness, scratch and chemical resistance, and are resistant to yellowing.

EBECRYL® 8314 is an aliphatic urethane tetraacrylate diluted with the reactive diluents isobornyl acrylate (IBOA) and hydroxy propyl methacrylate (HPMA). Films of EBECRYL® 8314 cured by ultraviolet light (UV) or electron beam (EB) have a unique combination of hardness, toughness, flexibility, and abrasion resistance coupled with excellent exterior durability properties. These performance properties make EBECRYL® 8314 ideal for applications such as paint protection, printed electronics, automotive interior film and embossing or thermoforming after cure.

AP 5212 is a medium viscosity, reactive polyamide hardener for epoxy resins based lacquers and coatings.

AP 1300 is a medium-viscosity reactive, Phenalkamine-epoxy resin adduct hardener solution for epoxy based lacquers and coatings.

EBECRYL® 8315 is an aliphatic urethane tetraacrylate diluted with the reactive diluent hydroxypropyl methacrylate (HPMA). Films of EBECRYL® 8315 cured by ultraviolet light (UV) or electron beam (EB) have a unique combination of hardness, toughness, flexibility, and abrasion resistance coupled with outstanding exterior durability properties. These performance properties make EBECRYL® 8315 ideal for applications such as paint protection, printed electronics, automotive interior film and embossing or thermoforming after cure.

EBECRYL® 1710 is an acrylic polymer diluted 60% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA)(1). EBECRYL® 1710 is used as the primary or a modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to improve film properties such as adhesion and lay-down.

EBECRYL® 8807 is an aliphatic urethane diacrylate that exhibits rapid surface cure response, light color and moderate viscosity. Films of EBECRYL® 8807 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness, abrasion resistance, and are resistant to yellowing.

EBECRYL®741 is an adhesion promoting resin with excellent pigment dispersion properties for radiation curable screen inks. It is designed for general purpose application on many treated plastic substrates. It can also be used as a let-down resin in combination with EBECRYL® epoxy acrylates, polyester acrylates and urethane acrylates.

EBECRYL® 885 is a trifunctional polyester acrylate oligomer. Films of EBECRYL® 885 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. EBECRYL® 885 is recommended for parquet floor coating, wood furniture coating applications and flexible coatings for metal.

EBECRYL® 838 is a polyester hexaacrylate that exhibits fast cure response and moderate viscosity. Films of EBECRYL 838 cured by ultraviolet light (UV) or electron beam (EB) demonstrate good abrasion and scratch resistance, solvent resistance and hardness.

Experimental DLVNE-61 is a medium low viscosity Novolac resin modified with a Cycloaliphatic polyglycidyl ether (free of any organic solvent) that facilitate high solids coating formulations with low volatile organic compound (VOC) emissions, improved application, strong chemical and thermal resistance.

EBECRYL® 1200 is an acrylate functional acrylic resin supplied in 45% by weight of butyl acetate. Upon evaporation of the solvent, films of EBECRYL® 1200 are physically dry and tack-free and after UV/EB curing are hard and chemical resistant without embrittlement. The viscosity and cured properties can be adjusted with the addition of reactive diluents such as 1,6-hexanediol diacrylate (HDDA), isobornyl acrylate (IBOA), trimethylolpropane triacrylate (TMPTA), and tripropylene glycol diacrylate (TPGDA). A suitable photoinitiator must be added for polymerization with UV energy

EBECRYL® 1885 is an undiluted polyesteracrylate resin. Films of EBECRYL® 1885 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. EBECRYL® 1885 is recommended for parquet floor and furniture applications.