Products

Preventol® ON Extra Preservative Solution is an aqueous, alkaline solution of 2-Phenylphenol.

UCECOAT® 7710 is a solvent free, energy curable polyurethane dispersion specifically developed for high gloss applications on wood and plastics. It exhibits high hardness and scratch resistance. UCECOAT® 7710 is not physically drying before UV curing.

PARALOID™ AU-608B are acrylic polyols specifically designed to produce hard, resistant, durable coatings when reacted with aliphatic isocyanates. The exceptional properties of these coatings have led to increased use in such heavy duty maintenance applications as chemical plant storage tanks and offshore rigs and platforms.

SURFYNOL® MD-20 is a very compatible molecular defoamer based on Gemini surfactant technology. Freeof siliconeand silica. Offers additional dynamic wetting properties.

TEGO® AIREX 991 shows very strong defoaming against both macro- and micro foam in solvent borne and high solids coatings. Especially for spray-applied coatings.

EBECRYL® 8213 is an aliphatic urethane acrylate with 70% solid content diluted in butyl acetate. EBECRYL® 8213 exhibits good yellowing resistance and very good outdoor resistance. Furthermore this resin provides very good adhesion onto aluminium-based vacuum metallization layer and most metallic basecoats for plastic coating.

ACRYSOL™ RM-12WE Rheology Modifier is a nonionic rheology modifier designed to offer high low-shear viscosity with an extremely shear thinning rheology and excellent thickening efficiency. It offers a rheology profile similar to ACRYSOL™ RM-12WE Rheology Modifier but is prepared without intentionally adding tin compounds to the production process.

EBECRYL® 4265 is an aliphatic urethane acrylate without reactive diluent. It is characterized by its low viscosity and yields coatings with good chemical and mechanical properties.

TEGO® Wet 251 is a highly active siloxane-based substrate wetting additive. It shows good substrate wetting properties and is suitable for a broad range of coatings. It is very compatible and recoatable.

BONDERITE® L-GP M 210 is a colloidal dispersion of molybdenum disulfide in alcohol. BONDERITE® L-GP M 210 ACHESON (known as MOLYDAG 210) offers excellent extreme-pressure lubrication in a resin-bonded system that air dries in five to ten minutes. The material is easily applied by standard spray, brush, or dip methods to all substrates not affected by the fluid component. BONDERITE® L-GP M 210 ACHESON (known as MOLYDAG 210) is supplied as a concentrate to be used as is or diluted in appropriate solvent for final application.

EBECRYL® 4220 is an aliphatic urethane acrylate diluted 25% in tripropyleneglycol diacrylate (TPGDA). EBECRYL® 4220 produces tough coatings that resist yellowing.

HP9078-Medium Oil Alkyd is a medium oil alkyd resin based on a combination of linseed oil and soybean oil. The solvent is VMandP naphtha. The main application for this resin is in the preparation of traffic alkyd paint but it can also be used in any application that requires fast set up and good durability.

ACEMATT® 810 is an untreated, coarse particle sized precipitated silica. It is especially recommended for coil coatings, as well as general industrial coatings.

EBECRYL® 4500 is an undiluted aromatic urethane acrylate designed for wood coatings (cork and parquet) with a high grit feeder abrasion resistance.

TEGO® AIREX 944 shows excellent defoaming against both micro- and micro-foam. Suitable for a broad range of coating systems. Ideally suited for high-solid and 2K solvent-free formulations.