Enhanced TDS
Identification & Functionality
- Blend
- No
- Chemical Family
- Chemical Name
- Plastics & Elastomers Functions
- Product Code
- MITM15762
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Benefits
- Hostastat® HS 1 pills Zn is an antistatic agent mainly used in engineering plastics and PVC
- it exhibits an outstanding efficiency and provides long term antistatic effect
Applications & Uses
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Product Applications
- Hostastat® HS 1 pills Zn is incorporated into plastics to reduce the negative effects of electrostatic charge accumulation such as dust attraction, static discharge and splashing printing inks.
- During the processing of thermoplastics, Hostastat® HS 1 pills Zn acts as a flow promoting lubricant and release agent
- Hostastat® HS 1 pills Zn is preferably used as an internal antistatic agent for polar plastics, such as PVC and styrenics.
- Where incorporation into the polymer is not possible, i can be applied externally to the surface of the finished article by spraying or dipping.
- Therefore it is normally used in the form of a 1% aqueous solution in conjunction with 0.1% of a suitable surface-acting alcohol, such as Mowiol© 10 - 74.
Properties
- Physical Form
- Soluble In
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000004
- Principal
Storage & Handling
- Storage Conditions
- Minimum shelf life is 2 years from the date of shipping when properly stored.
- Partially emptied containers should be carefully resealed immediately after use
- Protect from moisture.
- The product should be stored dry and at room temperatures and processed immediately after opening the packaging
Other
- Appearance (SDS)
- Granules
- Color (SDS)
- Light yellow
- Explosive Nature (SDS)
- Not explosive
- Item Number
- Other Hazards
- Avoid contact with skin and eyes
- Oxidizing Properties (SDS)
- Not oxidizing
- Protect from Freezing
- No
- Temperature Control
- No
- USA/DOT UN Number
- Not Applicable
- Material Composition
Value Units Test Method / Conditions Alkane Sulfonate min. 90.0 % % Sodium Sulfonate Content 5.0 % % - Physical Properties
Value Units Test Method / Conditions Melting Point 220.0 °C °C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 360.0 °C °C Differential Scanning Calorimetry Decomposition Temperature (SDS) min. 680.0 °C °C No decomposition if used as directed Density (SDS) 1.05 g/cm³ g/cm³ at 23°C, 30% water-borne solution Melting Point (SDS) min. 350.0 °C °C Differential Scanning Calorimetry Partition coefficient n-octanol/water (SDS) 0.2 - Softening Point (SDS) min. 200.0 °C °C Solubility In Water (SDS) 320.0 g/L g/L at 25°C Solubility In Water (SDS) approx. 320.0 g/L g/L At 25°C Surface Tension (SDS) 0.03 - at 20°C, 1 g/l Vapor Pressure (SDS) max. 0.000001 - Calculated by Syracuse pH (SDS) 7.0 - DIN EN 1262 at 20°C, Concentration: 1 % - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 2.0 -