Products

EBECRYL® 8414 is a urethane acrylate developed for liquid energy curable thermoforming inks. Flexographic inks made with EBECRYL® 8414 exhibit excellent thermoformability with draws up to 1" without cracking, blistering, separation or loss of adhesion. This medium viscosity oligomer has good pigment wetting capability and ink performance.

EBECRYL® 571 is a diluted polyester resin for narrow web shrink sleeve applications. It exhibits excellent adhesion, high flexibility, and superb shrink performance. For optimum performance EBECRYL 571 should be the dominant resin in the heat shrink ink formulation. EBECRYL 571 contains dipropyleneglycol diacrylate (DPGDA)(1) monomer.

WHT-6190A is polyester-based solvent based adhesive, supplied in form of white pellets with the characteristic of low viscosity, very fast crystallization rate, and good adhesion strength to PVC, PU, fabric and genuine leather.

EBECRYL®741 is an adhesion promoting resin with excellent pigment dispersion properties for radiation curable screen inks. It is designed for general purpose application on many treated plastic substrates. It can also be used as a let-down resin in combination with EBECRYL® epoxy acrylates, polyester acrylates and urethane acrylates.

Hostastat® HS 1 pills Zn is an alkane sulfonate which provides highly effective antistatic properties to thermoplastic polymers

EBECRYL® 3415 is a modified bisphenol A epoxy acrylate diluted with 40% 1, 6-hexanediol diacrylate (HDDA). This acrylated epoxy was developed for ultraviolet light (UV) curable screen printing, and exhibits excellent reactivity and good adhesion to various non-porous substrates. EBECRYL® 3415 meets all regulatory requirements and is no longer subject to the Significant New Use Rule (SNUR).

UCECOAT® 7734 is a UV curable polyurethane acrylate dispersion in water characterized by its outstanding stain resistance in both clear and white pigmented coatings, while maintaining very good flexibility.

EBECRYL® 811 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using EBECRYL® 811 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, polycarbonate and PVC. The water balance of this product allows inks based upon it to be run on press with low amounts of fountain solution: a key parameter for printing on non-absorbent substrates.

EBECRYL® PEG200DMA (polyethylene glycol di-methacrylate), CAS N° 25852-47-5, is a difunctional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® PEG200DMA forms homopolymers and copolymers. EBECRYL® PEG200DMA is compatible with a wide range of acrylated and methacrylated resins.

EBECRYL® 898 is a special purpose, 100% solids polyester acrylate resins that enables matte finishes in UV energy curable coatings, including ultra-matte coatings of <5 gloss (60°). It is compatible with other common acrylate resin types and is effective when used with typical silica matting agents. EBECRYL® 898 does not compromise performance properties such as chemical and stain resistance.

EBECRYL® 1300 is designed as the letdown oligomer for UV thermoformable ink applications, and should be used in conjunction with the pigment grind oligomer, EBECRYL® 8413. EBECRYL® 1300 exhibits good adhesion promoting properties. When used together with EBECRYL® 8413, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment.

RHOPLEX® E-1691LF is a low-formaldehyde, aqueous acrylic emulsion designed specifically as an overprint or letdown vehicle for adhesion to vinyl films and vinyl- coated substrates. RHOPLEX® E-1691LF offers excellent stain and solvent resistance, adhesion to vinyl, excellent plasticizer migration resistance, and excellent thermal color stability.

EBECRYL® IBOMA (isobornyl methacrylate) is a mono functional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® IBOMA forms homopolymers and copolymers. EBECRYL® IBOMA is compatible with a wide range of acrylated and methacrylated resins.

ACRYLTAC® SP-400 is a carboxylated acrylic copolymer emulsion.

LOTRYL® BESTPEEL 2407 is a ready-to-use thermoplastic composition designed to make peelable heat seal layers onto various substrates. The base resin is a random ethylene-methyl acrylate copolymer.