Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- Product Code
- MITM15611
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Materials Features
- Product Benefits
- WANNATE® HT-600 can be used as the hardener component for lightfast two-component polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties.
- Preferred co-reactants are polyacrylates or polyester polyols.
- The main applications for coatings based on WANNATE® HT-600 are automotive OEM, automotive refinishing, transportation, industrial finishing and plastics.
Applications & Uses
- Coating End Applications
- Compatible Polymers & Resins
- Markets
- Applications
Properties
- Physical Form
- Solubility Data
- WANNATE® HT-600 can be thinned with esters, ketones and aromatic hydrocarbons such as ethyl acetate, butyl acetate, methoxypropylacetate, acetone, methyl ethyl ketone, methyl isobutyl ketone, cyclohexanone, toluene, xylene, solvent naphtha 100 and mixtures thereof.
- Generally speaking, it has good compatibility with the solvents listed.
- However, the solutions formed must be tested for their storage stability.
- Only PU grade solvents should be used (max. 0.05% water, absence of reactive groups such as hydroxyl or amino groups). Aliphatic hydrocarbons are unsuitable as solvents.
- WANNATE® HT-600 is not recommended to thin to a lower solid content.
Regulatory & Compliance
Safety & Health
- Safety Information
- May cause sensitization by skin contact. Contains isocyanates.
- The product is used mainly as a hardener in coating materials or adhesives.
- The handling of coating materials or adhesives containing reactive polyisocyanates and residual monomeric HDI requires appropriate protective measures referred to in the safety data sheet.
- These products may therefore be used only in industrial or trade applications. They are not suitable for use in homeworker (DIY) applications.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S002918
- Principal
Storage & Handling
- Storage and Shelf Life Conditions
- Storage in original container. Protect from moisture, heat and foreign material.
- WANNATE® HT-600 is sensitive to moisture. Storage at higher temperatures will result in increasing of color and viscosity. Recommended storage temperature is -20 ~40°C.
- Prolonged storage of a solution with a lower content may result in turbidity and sedimentation, even condensation.
- It can be stored at least for 6 months at room temperature if stored properly.
Other
- Appearance
- Colorless to slightly yellowish clear liquid
- Appearance (SDS)
- Clear colorless to pale yellow viscous liquid
- Insoluble in (SDS)
- Water reacts slowly with water
- Item Number
- Odor (SDS)
- Faint
- Other Hazards
- Hazards Not Otherwise Classified: Not applicable.
- TDG Canada Proper Shipping Name
- Not Applicable
- TDG Canada UN Number
- Not Applicable
- USA/DOT Proper Shipping Name
- Not Applicable
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 40.0 Hazen - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 6.0 mo - Physical Properties
Value Units Test Method / Conditions Density 1.16 g/mL At 25°C Flash Point 158.0 °C Storage Temperature -4.0-104.0 °F Viscosity 900.0-1500.0 mPa.s At 25°C - Material Composition
Value Units Test Method / Conditions Hexamethylene Diisocyanate Monomer Content max. 0.25 % Isocyanate Content 22.5-23.5 % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) 445.0 °C Decomposition Temperature (SDS) 250.0 °C Flash Point (SDS) 158.0 °C Initial Boiling Point (SDS) 250.0 °C Odor Threshold (SDS) 5.0 ppm For Hdi Relative Density (SDS) 1.16 - Water = 1 Vapor Pressure (SDS) 246.0 Pa At 20°C Viscosity (SDS) 1200.0 cSt at 25°C