Products

TEGO® DISPers 652 is a wetting and dispersing additive for inorganic pigments. Can be used in direct grinds of solventborne and radiation-curing formulations to reduce the viscosity. As a co-additive in universal colorants, it acts as a compatibilizer.

TEGO® Twin 4100 as a siloxane-based gemini surfactant, combines substrate wetting and anti-crater effects with some defoaming properties. It is highly compatible and suitable for a wide range of different coatings and applications.

ROSHIELD™ 3275 is specifically designed for reaction with water- dispersible polyisocyanates for wood coating applications where early hardness and sandability are important, under mild drying conditions. Unlike nitrocellulose lacquers, solventborne 2-component polyurethanes, and solventborne acid catalyzed finishes, waterborne polyurethane coatings based on this acrylic polyol have extremely low VOCs and very good early print resistance. In addition, films based on this emulsion are water- white and resistant to yellowing. ROSHIELD™ 3275 cures under ambient conditions, but heat on-line is recommended for early pack-out. Applications for this excellent, cost/performance, 2- package system include clear, pigmented and flatted systems for office and laboratory furniture, kitchen cabinets and fine furniture.

DURATRACK™ R-100 Emulsion is a specially designed all-acrylic resin for fast drying and high-performance traffic markings. The combination with DURATRACK™ AEH- 100 Acrylic-Epoxy Hybrid as a two-component waterborne coating system demonstrates to have excellent durability, aggregates retention, wear resistance and adhesion to road surfaces. In addition, it brings such benefits as long pot-life, ease of handling and application. The installation of DURATRACK™ coating system with equipment normally for typical waterborne traffic paint significantly reduces the total cost compared to other two-component coating systems. DURATRACK™ coating system is ideal for building high quality and large scale of green bike lane networks.

AEROSIL® R 974 RHE Coating is a hydrophobic fumed silica after-treated with DDS (dimethyldichlorosilane).

AIRASE® 8070 is an effective deaerator concentrate based on polyether siloxane technology. Very effective against micro-foam. Offers good compatibility.

TEGO® DISPers 678 is a polymeric wetting and dispersing additive for solventborne formulations. Providesoutstanding long-term stability especially for formulations with mixed pigmentation.Stabilizes all kindsof pigments and reduces floatation.Excellent viscosity reduction makes it very suitable for 2- pack high solids formulations.

TEGO® Flow 425 is a universal, siloxane-based flow and anti-crater additive. It is highly compatible and suitable for a broad range of coatings.

WANNATE® HT-100 is a solvent free aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid.

WANNATE® HT-300 is a solvent free aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid.

TEGO® Glide 466 shows an excellent anti-crater effect on contaminated substrates. It is very effective and can be used in a broad range of different coatings.

AEROSIL® R 972 RHE Coating is a fumed silica after-treated with DDS (dimethyldichlorosilane). It is easytodisperseand suitablefor a broad rangeof applications.

WANNATE® IT-170BS dissolved Aromatic 100 and n-butyl acetate (2:1), can be used as the hardener component for lightfast two-component polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties. Based on its high hardness, it is normally mixed with WANNATE® HT series.

TEGO® DISPers 650 is a non-ionic wetting and dispersing additive that can be used in waterborne and solventborne formulations and in universal colorants. Especially for organic pigments;providesexcellent color strength development.