Products

Barimite XF is a single-ingredient barium sulfate (BaSO₄) used as a filler and pigment in various applications. It is commonly used in coating applications, particularly in powder coatings, as well as in plastics & elastomers. Synonyms include barium sulphate, barium white, Liquibarine, and Micropaque.

PolyJet 502SM is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

Recycled Mineral Filler - RMF-45 is a filler composed of calcium compounds, calcium salts, and carbonates, used as an industrial additive.

Pale 1000 Blown Castor Oil commonly known as blown oils have increasing viscosities resulting from oxidative and crosslink polymerization at the double bonds and hydroxyl groups. Oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil and solvent resistance.

PolyJet 502 is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

DERTOPHENE® 1510 is a high softening point terpene phenolic resin with high polarity. Thanks to its excellent compatibility with chloroprene and acrylics, this resin improves adhesion, peel strength by preserving outstanding cohesive balance.

Polyfill 405 is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

GRANOLITE® P is a pentaerythritol ester of rosin, is a light-colored and deodorized resin suitable in various adhesive and road marking Hot Melt formulations.

Exolit® OP 950 is a white granular powder based on an organic phosphinate. The product is not hygroscopic and slightly soluble both in water and in common organic solvents. It melts at 200°C.

Indopol® H-1900 functions as an emollient, solubilizer, dispersant, viscosity modifier, and stabilizer in cosmetic ingredients.

CARPOL® GP-3000 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 3000 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® GP-3000 may also be included as a component in other urethane products and formulations.

Exolit® OP 1400 is a non-halogenated flame retardant based on organic phosphinates for reinforced polyamide 6, polyamide 66 and high temperature polyamides. The produt achieves its flame retardant effect through a combined gas phase and condensed phase mode of action. Exolit® OP 1400 is based on a new chemical substance which currently being registered in various national and regional chemical inventories.