Products

Castorwax® DS-270 is a wax-like compound obtained by the controlled hydrogenation of pure castor oil, which occurs in the seed of the castor plant, Ricinus communis. Castorwax® DS-270 is highly compatible with a variety of plastics and resin systems and has limited solubility in organic solvents, which will reduce additive an integral part of the cured film. the possibility of its being washed or leached out of the final product Castorwax® DS-270 also has an available reactive hydroxyl group which, if desired, can be utilized to react into the cured film making the additive an integral part of the cured film.

Europrene® SOL T 190 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and isoprene, where bound styrene content is 16 % wt and diblock content is 25 %. A non-staining, TNPP free antioxidant system is added during the production process.

MILLIONATE® NM is containing a higher amount of 2,4’-diphenylmethane diisocyanate, and being liquid at room temperature and easy to handle.

3M™ Glass Bubbles K20HS are high-strength additives for polymers made from a water-resistant and chemically stable soda-lime borosilicate glass. These hollow glass bubbles can be compounded with a variety of polymers to reduce the overall density of the composite. These composites can be incorporated into deep sea syntactic foam buoyancy modules to improve uplift properties of the system at minimal foam volumes. The high strength of K20HS glass bubbles can withstand both the high processing shear forces of polymer mixing and the pressure of seawater in many applications. 3M™ Glass Bubbles K20HS have isostatic crush strengths of 750 psi with a minimum of 90% survival.

3M™ Glass Bubbles S28HS are high-strength additives for polymers made from a water-resistant and chemically stable soda-lime borosilicate glass. These hollow glass bubbles can be compounded with a variety of polymers to reduce the overall thermal conductivity of the composite. These composites can be coated or incorporated into deep sea oil pipelines to improve the flow assurance properties of the system.

40 Oil - Polymerized Castor Oil at the double bond yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks, and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil, and solvent resistance.

AA™ Standard Castor Oil is a commercial, quality refined grade castor oil. It is a light- colored viscous liquid. The principle constituent (approximately 90%) is the triglyceride (ester) of ricinoleic acid. The combination of hydroxyl group and unsaturation exists only in castor oil.

ACRYLTAC® SP-405 is a carboxylated acrylic copolymer emulsion. Higher shear and lower tack values compared to SP-400.

ACRYLTAC® SP-400 is a carboxylated acrylic copolymer emulsion.

ACRYLTAC® SP-409 is a high solids, multi-functional acrylic emulsion polymer.

ACRYLTAC® SP-462 is an all acrylic surfactant stabilized polymer emulsion.

AddWorks® IBC 760 is a mixture of a UV absorber, hindered amine light stabilizer (HALS) and antioxidant without any hazard labeling and designed to provide outstanding performance in SMP sealants in terms of light and heat stabilization. Available in micronized powder form, AddWorks® IBC 760 prolongs the service life of SMP sealants as it reduces cracking and yellowing that typically occurs if exposed to strong sunlight or high temperature conditions. The performance is evident when tested against current benzotriazole containing solutions in the market. Our new stabilizer solution is an ideal ingredient to formulate high performance SMP sealants used for construction, automotive and other outdoor applications.