Products

TEGO® Foamex 852 is an effective defoamer concentrate based on polyether siloxane technology. Suitable for pigmented and clear formulations.

EBECRYL® 8800-20R is an aliphatic urethane acrylate diluted with the reactive diluents tripropylene glycol diacrylate (TPGDA) (1) and ethoxyethoxyethyl acrylate (EOEOEA)(2). Films of EBECRYL® 8800-20R cured by ultraviolet light (UV) or electron beam (EB) exhibit toughness, flexibility, good exterior durability and resistance to yellowing.

EBECRYL® 294/25 is an aliphatic urethane triacrylate diluted 25% by weight with the reactive diluent 1,6-hexanediol-diacrylate (HDDA). Films of EBECRYL® 294/25 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion and stain resistance, good exterior durability, toughness, and are resistant to yellowing.

TEGO® Foamex 840 is an effective defoamer concentrate based on polyether siloxane technology. Contains no fumed silica. Provides good long-term effectiveness and additional deaeration effect.

DLVE™ 52 is a low viscosity epoxy resin that facilitates high solids coating formulations with low volatile organic compound (VOC) emissions, while minimizing compromises in performance. DLVE™ 52 be cured using multiple types of curing agents.

TEGO® Foamex 844 is an effective defoamer concentrate based on polyether siloxane technology. Contains no fumed silica. Suitable for pigmented and clear formulations.

TEGO® Foamex 825 is a compatible defoamer emulsion based on polyether siloxane technology. Good balance of effectiveness and compatibility.

Epoxy Hardener - AP 5501 is a low viscosity, reactive poly-amido amine hardener for epoxy resins based lacquers and coatings.

AP 5942 is cycloaliphatic, modified with epoxy resin stabilized polyamine adduct.

TEGO® Foamex N provide sut most effectiveness against macro- and microfoam in solventborne, radiation-curing, and high solids coatings.

EBECRYL® 3418 is a modified bisphenol A epoxy diacrylate that exhibits excellent reactivity and reduced viscosity. Films of EBECRYL® 3418 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high flexibility, gloss, toughness, adhesion and superior chemical and scratch resistance.

EBECRYL® 1885 is an undiluted polyesteracrylate resin. Films of EBECRYL® 1885 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. EBECRYL® 1885 is recommended for parquet floor and furniture applications.

EBECRYL® 893 is a modified polyester acrylate specifically developed for UV curable field applied concrete and vinyl composition tile (VCT) floor coatings. EBECRYL 893 provides resistance to yellowing upon cure and over its lifetime. The low viscosity of EBECRYL 893 also provides latitude to achieve low viscosity formulations, which are required for field applied applications. Concrete and VCT coatings based on EBECRYL 893 provide a good balance of properties such as cure speed, adhesion, hardness, and scratch resistance. Good chemical and solvent resistance and high gloss are also obtained with concrete and VCT coatings based on EBECRYL 893.

TEGO® Glide 466 shows an excellent anti-crater effect on contaminated substrates. It is very effective and can be used in a broad range of different coatings.

SIPERNAT® 26 Coating is a specially engineered precipitated silica that functions as a conditioning agent and carrier. It can be used to improve flow behavior and storage stability of powdered materials, and it may impart rheological and matting benefits to liquid coatings.