Products

TEGO® VariPlus 1201 TF strongly improves mechanical properties of solventborne inks and coatings. It enhances gloss, blocking resistance, and adhesion on many substrates.

EBECRYL® 605 is a bisphenol A epoxy diacrylate diluted approximately 27% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) to provide a lower viscosity, easier handling product. EBECRYL 605 exhibits light color and fast cure response. Films of EBECRYL 605 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness and superior chemical resistance.

TEGO® Foamex 32 is a highly effective and compatible self-emulsifying defoamer concentrate based on polyether siloxane technology. Especially for architectural paints.

EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co-resin to UV curable formulations. EBECRYL® LED 03 – when combined with an appropriate photoinitiator system – transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photo initiators. Coating and inks based on EBECRYL® LED03 exhibit a low odor after UV or EB curing.

Dynasylan® AMMO is a bifunctional organosilane possessing a reactive primary amine and hydrolyzable inorganic methoxysilyl groups. The dual nature of its reactivity allows Dynasylan® AMMO to bind chemically to both inorganic materials (e.g. glass, metals fillers) and organic polymers (e.g. thermosets, thermoplastics and elastomers), thus functioning as an adhesion promoter and a surface modifier. Dynasylan® AMMO is a clear, colorless liquid having an amine­like odor which is soluble in alcohols and aliphatic and aromatic hydrocarbons.

TEGO® Foamex 16 is a defoamer concentrate based on polyether siloxane technology. Offers a good balance between effectiveness and compatibility. Developed for architectural paints.

RHOPLEX® B-85 is a very firm anionic acrylic binder used as an additive to anionic binders to stiffen hand. Unlike other RHOPLEX™ dispersions, RHOPLEX™ B-85 does not form continuous films under normal conditions of application. When blended with softer polymers it helps produce films with improved toughness and improved resistance to blocking.

EBECRYL® 2221 is a hexafunctional aromatic urethane acrylate that provides very fast cure response when exposed to ultraviolet light (UV) or an electron beam (EB). Cured films of EBECRYL® 2221 exhibit good hardness and solvent resistance.

CARBOWET® GA-100 is a non-ionic grind aid for waterborne formulations. Focus on pigment wetting. Additionally helps deaeration of the millbase.

NGT 200 L is a low viscosity, light colour renewable natural phenolic compounds; it is a mono hydroxyl phenol having a long hydrocarbon chain at meta position which makes it a very versatile material having different uses.

AP 5225 is a reactive poly-amido amine hardener for epoxy resins based coatings.

UCECOAT® 7849 is a radiation curable polyurethane dispersion which is tack- free before cure and after water evaporation. It was developed for wood coatings, but can also be used for other applications. Because of its non- irritant nature and low viscosity, it and can be applied safely by spray coating and curtain coating.

TEGO® Foamex 3062 is a highly effective defoamer concentrate based on polyether siloxane technology. Very suitable for pigmented and/or highly viscose formulations.

TEGO® Glide 435 shows good slip effect and substrate wetting without stabilizing foam. It is highly recommended for radiation-curable coatings.

AP 5689 is low viscosity, modified aliphatic amine adduct hardener for epoxy resins based lacquers coatings.