Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Oligomer, Monomer
- Product Code
- MITM11472
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
- EBECRYL® LED 03 is characterized by:
- Low viscosity
- Transparent liquid appearance
- UV/EB cured products based on EBECRYL® LED 03 are characterized by the following performance properties:
- Good (surface) cure response
- Good flexibility
- Adhesion promotion
- High gloss
- Low odor
- Low migration potential
- The actual properties of UV/EB cured products also depend on the selection of other formulation components such as the main binder, reactive diluents, additives and photo initiator system.
- EBECRYL® LED 03 is characterized by:
Applications & Uses
- Coating End Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Cure Method
- Ink & Toner End Applications
- Markets
- Applications
- Product Application
EBECRYL® LED 03 is recommended as a co-resin (5-20 w% on formulation) to increase surface cure of formulations for overprint varnishes, coatings, flexographic-, gravure-, screen- and inkjet inks that are cured with UV LED, UVA or low energy lamps.
Properties
- Physical Form
Safety & Health
- Safety Precautions
- Avoid contact with eyes.
- Avoid prolonged or repeated contact with skin.
- Direct contact with this material may cause minimal eye and skin irritation.
- Contact with skin may cause a cross-allergic reaction in persons already sensitized to acrylate materials.
- Wash thoroughly after handling.
- Keep container tightly closed.
- Use with adequate ventilation.
Packaging & Availability
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage and Handling Conditions
- Before using EBECRYL ® LED 03, consult the Material Safety Data Sheet for additional information on hazards, handling procedures, and recommended protective equipment.
- The recommended storage temperature for EBECRYL® LED 03 is 4°C to 40°C.
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids.
- This might cause uncontrollable polymerization of the product with the generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.
- Procedures that remove or displace oxygen from the material should be avoided.
- Do not store this material under an oxygen free atmosphere.
- Dry air is recommended to displace material removed from the container.
- EBECRYL® LED 03 should be used within 2 years after production.
Other
- Appearance
- Clear liquid
- Appearance (SDS)
- Clear liquid
- Color (SDS)
- Greenish brown, clear
- Immiscible In (SDS)
- Water
- Item Number
- Odor (SDS)
- Ester
- Other Hazards
- Contact with skin may cause a cross-allergic reaction in persons already sensitized to acrylates, Polymerization may occur from excessive heat , contamination or exposure to direct sunlight .
- Protect from Freezing
- Yes
- Temperature Control
- Yes
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Nitrogen Content 4.5 % % - Optical Properties
Value Units Test Method / Conditions Color Scale max. 1.0 Gardner Gardner Gardner Color Scale - Physical Properties
Value Units Test Method / Conditions Density 1.03 g/cm³ g/cm³ At 25°C Molecular Weight 1300.0 g/mol g/mol Storage Temperature 39.0-104.0 °F °F Viscosity 450.0 - At 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C °C Density (SDS) 1.13 g/cm³ g/cm³ Flash Point (SDS) min. 100.0 °C °C Vapor Pressure (SDS) max. 0.1 - at 20°C pH (SDS) max. 0.3 - - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 2.0 -