Products

MAINCOTE™ 5045C Emulsion is an aqueous acrylic emulsion polymer based on AVANSETM Acrylic Resin Technology. It facilitates the formulation of coatings to less than or equal to 25 g/L VOC for use in light to medium duty industrial maintenance and protective coatings applications. It offers excellent UV durability, corrosion resistance, block resistance, and ease of formulation with excellent paint stability. It can be formulated into highly durable topcoats and high gloss direct-to-metal (DTM) finish coats. When formulated at 25 g/L VOC or below, MAINCOTE™ 5045C Emulsion offers improvements in these properties versus many current DTM finishes formulated at higher VOC levels of 100 g/L and above. The low coalescent demand of MAINCOTE™ 5045C Emulsion allows compliance with stringent VOC regulations. MAINCOTE™ 5045C contains no intentionally added APEO (alkylphenol ethoxylate) surfactants and no intentionally added PFAS.

EBECRYL® 8606 is an aliphatic urethane tetraacrylate. Films of EBECRYL® 8606 cured by ultraviolet light (UV) or electron beam (EB) have a unique combination of hardness, toughness, flexibility, and abrasion resistance coupled with outstanding exterior durability properties. These performance properties make EBECRYL® 8606 ideal for applications such as paint protection, printed electronics, automotive interior film and embossing or thermoforming after cure.

KRONOS® 2066 is used for superior opacity and high gloss development.

AP 5205 is a modified cyclo-aliphatic amine curing agent for epoxy resin based lacquers and coatings.

RHOPLEX® DCR-113 is an aqueous all-acrylic emulsion polymer designed for formulating into high solids Deck and; Concrete Restoration coatings. Low VOC, APEO-free restoration coatings can be formulated with RHOPLEX® DCR-113 to provide excellent abrasion resistance and flexibility, in addition to adhesion to concrete and well-weathered wood.

UCECOAT® 6560 is an aliphatic urethane acrylate solution in water, containing approx. 50% acrylated products. The UCECOAT® 6560 is organo-tin free and highly recommended as primer for wood applications. Films containing UCECOAT® 6560 and cured by ultraviolet light (UV) or electron beam (EB) exhibit a nice optical aspect on different woods. Stability problems can occur if more water is added. Therefore, we recommend to use the EBECRYL® 11 produced by allnex.

AEROSIL® COK 84 is a formulated product with highly dispersed fumed aluminium oxidein the ratio of 5:1.

AP 5660 is a low viscosity, modified aliphatic amine hardener for epoxy resins based coatings at ambient and elevated temperature curing.

EBECRYL® 1606 is a bisphenol A epoxy diacrylate diluted with 20-25% of trimethylolpropane triacrylate (TMPTA)(1) monomer. EBECRYL® 1606 is characterized by its light color, low odour and fast cure response. Films of EBECRYL® 1606 cured by ultraviolet light (UV) or electron beam (EB) exhibit high gloss, high surface hardness and the good solvent resistance typical of an epoxyresin.

TEGO® Wet 238 is a modified polyether-siloxane-based superwetter providing exceptional substrate wetting and good flow and leveling in waterbornecoatings and inks.

AEROSIL® 150 VS is a densified hydrophilic fumed silica with a specific surface area of 150 m²/g.

AEROSIL® 200 Coating is a hydrophilicfumed silica with a specific surface area of 200 m²/g. Widely usable in a broad range of applications.

SURFYNOL® 485 is a substrate wetting agent for waterborne coatings and inks with high solubility in aqueous systems. SURFYNOL® 485 can also be used for its stabilization and emulsification properties.

TEGO® AddBond LTH improves adhesion of coatings on metal and plastic substrates. It does not soften the coating film and can be used for solvent borne, solvent-free, and radiation-curing coating systems.