EBECRYL® 1606

EBECRYL® 1606 is a bisphenol A epoxy diacrylate diluted with 20-25% of trimethylolpropane triacrylate (TMPTA)(1) monomer. EBECRYL® 1606 is characterized by its light color, low odour and fast cure response. Films of EBECRYL® 1606 cured by ultraviolet light (UV) or electron beam (EB) exhibit high gloss, high surface hardness and the good solvent resistance typical of an epoxyresin.

Principal: allnex Radcure

Chemical Family: Epoxy Acrylates

Technical Data Sheet
  • TypeDocument Name
View All Documents

Enhanced TDS

Identification & Functionality

Blend
No
CASE Ingredients Functions
Chemical Family
Function
Oligomer, Monomer
Product Code
MITM12055
Single Ingredient
Yes
Technologies
Product Families

Features & Benefits

CASE Ingredients Features
Performance Highlights

Ebecryl®1606 is characterized by :

  • Light color
  • Low odor
  • Fast cure response

UV/EB cured products based on Ebecryl®1606 are characterized by the following performance properties :

  • High gloss
  • High surface hardness
  • Good solvent resistance

The actual properties of UV/EB cured products also depend on the selection of the other formulation components, such as reactive diluent(s), additives and photoinitiators.

Applications & Uses

Application Method
Compatible Substrates & Surfaces
Cure Method
Markets
Applications
Product Application

Formulated UV/EB curable products containing Ebecryl®1606 may be applied by lithographic, screen, gravure, direct or reverse roll, and curtain coating methods Ebecryl®1606 is recommended for use in :

  • Overprint varnishes
  • Coatings for wood, cardboard, chipboard and paper
  • Paper upgrading

Technical Details & Test Data

Viscosity Reduction
  • EBECRYL®1606 can be diluted with reactive monomers such as trimethylolpropane triacrylate (TMPTA)(1), tripropyleneglycol diacrylate (TPGDA)¹, 1,6 hexanediol diacrylate (HDDA)¹ and oligotriacrylate (OTA 480)¹. The specific reactive diluent(s) used will influence performance properties such as hardness and flexibility.
  • ¹) TMPTA, TPGDA, HDDA and OTA 480 are produced by Allnex

Safety & Health

Safety Precautions
  • The following is a summary of the precautions to be taken when handling this product. 
  • The toxicological properties of this material have not been fully determined.
  • Products of this type can be expected to be eye and skin irritant and have the potential to cause sensitization or other allergic responses.
  • Appropriate precautions should be taken to avoid eye and skin contact and to avoid inhalation of the aerosols or vapors. 

Principal Information

Group Principal Number
S000001
Principal

Storage & Handling

Storage and Handling Conditions
  • Care should be taken not to expose radiation curable products to temperatures exceeding 40°C for prolonged periods or to direct sunlight.
  • This might cause uncontrollable polymerization of the product with generation of heat.
  • Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.
  • Do not store this material under an oxygen free atmosphere.
  • Use dry air to displace material removed from the container.
  • This material should not be stored for more than 2 years.

Other

USA/DOT UN Number
Not Applicable
Optical Properties
ValueUnitsTest Method / Conditions
Color Scalemax. 1.0 GardnerGardnerGardner Color Scale
Chemical Properties
ValueUnitsTest Method / Conditions
Acid Valuemax. 2.0 mg KOH/gmg KOH/g
Shelf Life & Stability
ValueUnitsTest Method / Conditions
Shelf Life2.0 yryr
Physical Properties
ValueUnitsTest Method / Conditions
Density1.15 g/cm³g/cm³
Molecular Weight500.0 g/molg/mol
Viscosity-30000.0-30000.0 mPa.smPa.sAt 25°C
Material Composition
ValueUnitsTest Method / Conditions
Solid Content75.0-80.0 %(W/W)%(W/W)