Products

AA™ Standard Castor Oil is a commercial, quality refined grade castor oil. It is a light- colored viscous liquid. The principle constituent (approximately 90%) is the triglyceride (ester) of ricinoleic acid. The combination of hydroxyl group and unsaturation exists only in castor oil.

Acconon® CC-6 is a water-soluble emollient. It is nonionic and compatible with other ionic species in formulation. It is used in personal care both as an emulsifying agent with an HLB of 12.5. This material acts as a low-irritation secondary surfactant, yet has a moisturizing effect due to its re-fatting properties. Acconon CC-6 is ideally suited for use in haircare and bath products where its luxurious afterfeel combined with its solubilization and emulsification properties are best employed.

#1 Imported Castor Oil is a Technical Grade pure castor oil. Castor Oil, also known as Ricinus oil, is a triglyceride of fatty acids which occurs in the seed of the castor plant, Ricinus communis. #1 Imported Castor Oil is also available as DRY #1 Castor Oil with a moisture content of 0.02% maximum.

Baling® SEPS YH-4010 is a 37% combined styrene content and 100% diblock content. The product is powder and cosmetic white oil thickening, cosmetic water retention ointment. The product has stable physical and chemical properties, good viscosity-temperature performance, and is easy to pump into the fiber when it is applied to the optical fiber filling grease, and has a low oil separation rate.

SIPERNAT® 22 LS Coating is a finely ground silica with a high absorption capacity for liquids. SIPERNAT® represents a specific product range of precipitated silica, aluminium and calcium silicates.

CEAMVIS 91-460 is a carrageenan based product, standardized to obtain a uniform performance. Carrageenan is a natural hydrocolloid extracted from red seaweed of the Rhodophyceae class.

Citroflex™ A-4 is a low molecular weight citric acid ester partially derived from bio-based raw materials.

CAPTEX® 300 is manufactured by the esterification of glycerin and caprylic or capric fatty acids which originate from vegetable sources (typically palm, palm kernel, and/or coconut).

CAPTEX® 355 C is manufactured by the esterification of glycerin and caprylic or capric fatty acids which originate from only coconut sources.

CAPTEX® 8000 is manufactured by esterification of glycerin and caprylic acid which originate from vegetable sources (typically palm, palm kernel, and/or coconut sources).

Castorwax® is a wax like compound obtained by the controlled hydrogenation of pure castor oil. The principle constituent is glycerol tri-(12-hydroxystearate), also known as opalwax. Castorwax® is a hard, brittle, high melting point wax that is insoluble in most organic solvents but is highly compatible with most resins and waxes.